# Aledia account plan

> Aledia is a Grenoble deep-tech company making 3D nanowire microLEDs on silicon for displays, with 218 employees and its first product launched in 2026.

## At a glance

Aledia is a French deep-tech company spun out of CEA's labs in 2011 that grows GaN nanowires on standard silicon wafers to make 3D microLEDs for next-generation displays. Its target markets are augmented reality smart glasses, smartwatches and smartphones, automotive dashboards and head-up displays, and TVs, and it sells to display panel makers and device makers. It has 218 employees, of whom 49 doctoral students, 248 active patent families and two sites near Grenoble: Echirolles and the Champagnier fab completed in 2024. It is privately held, backed by CEA Investissement, Supernova Invest, Braemar Energy Ventures and Bpifrance with the State's France 2030 programme; it has raised about $500 million to date and reported no revenue before its first product launch in January 2026. Pierre Laboisse is Chairman and CEO.

## Strategic priorities

- **Commercialise FlexiNova**: FlexiNova, a 6 V microLED with a 15 µm × 30 µm chip made on 200 mm silicon (FN1530F6), became commercially available on 26 January 2026, with a roadmap of 6 V or 9 V products and chips down to 3.5 µm.
- **Native RGB microdisplay for AR glasses**: AR smart glasses are the main focus; red emission is the main challenge, with a deliverable product hoped for by 2028 and a first consumer version perhaps not before 2030.
- **Scale up manufacturing**: Plan to raise capacity from 200 wafers per week to 3,000 wafers per week by 2029–2030, with the pilot line able to support a customer ramp to nearly 5,000 wafer starts per week.
- **New funding round**: A raise is planned in 2026, aimed at strategic investors including customers, to launch mass production from 2027/28.
- **Relocate microLED production to Europe**: The CEO's stated ambition is to become the world leader in next-generation displays and to relocate microLED production to Europe, where all microLED displays are today imported from Asia.

## Investments and deals

- **Champagnier microLED fab**: A large-scale fab in Champagnier near Grenoble, chosen in 2020 as a EUR 50M project and completed in 2024; the in-house pilot line represents over $200 million, and the fab received its last equipment in June 2025.
- **EUR 120M funding round**: Raised in September 2023 from historical shareholders and the French Tech Souveraineté scheme of France 2030, to start production and commercialisation.
- **Responsible purchasing programme**: Launched in 2025: 60% of strategic suppliers signed the charter, with a goal that 100% of new suppliers sign it.

## Challenges and risks

- **MicroLED cost and integration**: MicroLED is held back by production cost, mass transfer and repair; integrators struggled to handle 3.5 µm chips, which led to the larger FlexiNova formats.
- **Cash burn before revenue**: After more than ten years with no product and no revenue, annual burn is around $100 million according to a Yole analyst, and the next raise depends on hitting objectives in early 2026.
- **Red emission for AR**: Red remains the main technical challenge for the native RGB microdisplay for AR glasses.
- **Competition from OLED and LCD**: Price competition with OLED and LCD is strong in consumer, automotive and TV displays.

## What leadership says

> "After 12 years of R&D, nearly 300 patents, and $600 million in investment, Aledia has overcome the toughest hardware challenges." — Pierre Laboisse, President & CEO, SemiWiki CEO interview, April 8, 2025

> "No technology in mass production today can meet all these criteria at the same time." — Pierre Laboisse, President & CEO, SemiWiki CEO interview, April 8, 2025, on display needs for AR and consumer products

> "The AR glasses market is accelerating fast, all our resources had to be aligned" — Felix Marchal, Chief Sales & Marketing Officer, Information Display article, July 2025, translated by Aledia

> "FlexiNova turns the technological promise of microLEDs into an industrial reality" — Felix Marchal, Chief Sales & Marketing Officer, FlexiNova launch press release, 26 January 2026, translated


## Where a supplier can help

- **Fab ramp-up equipment and services**: The plan to go from 200 to 3,000 wafers per week by 2029–2030 at Champagnier calls for semiconductor equipment, inspection, metrology and fab services.
- **Display ecosystem partners**: Commercialising FlexiNova with panel makers needs tight integration with equipment makers, inspection providers and component suppliers, which Aledia itself names.
- **Fundraising and finance support**: The 2026 raise from strategic investors to fund mass production from 2027/28 points to corporate finance, advisory and investor-relations services.
- **Supplier CSR and environment**: The responsible purchasing programme and the 2025 carbon footprint due in 2026 favour suppliers who can document CSR criteria and emissions data.

_Tamtam's reading of the priorities and challenges above, not the company's own words._

## Key documents

### [Aledia raises EUR 120M from its historical shareholders and recruits Pierre Laboisse as CEO (press release)](https://www.minalogic.com/wp-content/uploads/2023/09/2023-09-26-cp-aledia.pdf)

Report · 2023-09-26

- Aledia raised **EUR 120M** (September 2023), its latest announced round, entirely from historical shareholders: CEA Investissement, Supernova Invest, Braemar Energy Ventures, Bpifrance (SPI and Ecotechnologies funds), alongside the State's French Tech Souveraineté scheme (France 2030).
- Same day, **Pierre Laboisse** (ex-Executive Vice President of ams Osram, nearly 30 years in high tech) became President & CEO, succeeding founder **Giorgio Anania**, who stays on the board.
- Aledia designs a new generation of LEDs made on large-diameter (200 mm / 8-inch) silicon substrates, promising longer battery life, better readability, image quality and resolution.
- Industrial footprint: a EUR 20M, 4,000 m² building in Echirolles (2019) and a EUR 50M large-scale fab in Champagnier near Grenoble (chosen in 2020) for series production of 3D microLEDs.
- Stated purpose of the money: start production and commercialisation of its first products and accelerate industrial development.
- For a seller: the company is state-anchored (Bpifrance/France 2030) and moving from R&D into industrialisation; the new CEO is an operator from a large semiconductor group.

### [CEO Interview with Pierre Laboisse of Aledia (SemiWiki)](https://semiwiki.com/ceo-interviews/354047-ceo-interview-with-pierre-laboisse-of-aledia)

Executive talk · Pierre Laboisse, President & CEO · 2025-04-08

- Aledia: French deep-tech spun out of CEA's labs in 2011, making **3D nanowire microLEDs** (GaN nanowires grown on standard silicon wafers) for next-generation displays.
- Priority market: **augmented reality (smart glasses)**; also consumer products (smartwatches, smartphones), automotive (dashboards, head-up displays) and TVs.
- Laboisse: "After 12 years of R&D, nearly 300 patents, and $600 million in investment, Aledia has overcome the toughest hardware challenges."
- Differentiator: an **over $200 million in-house pilot production line** in Grenoble's "Display Valley", on 8-inch and 12-inch silicon, for lower cost and faster iteration than 2D microLED players.
- Capacity claim: ready to support customer demand ramp up to **nearly 5,000 wafer starts per week**.
- Engagement model: customers co-design early, integrating the microLEDs into their next-generation devices; the pilot line lets Aledia adapt quickly.
- Now focused on bringing microLEDs to market for AR, automotive, wearables and electronics.

### [After a long journey, Aledia makes considerable progress in MicroLED technology (Information Display, translated by Aledia)](https://www.aledia.com/actualites/apres-un-long-parcours-aledia-progresse-considerablement-dans-la-technologie-microled/)

Executive talk · Felix Marchal, Chief Sales & Marketing Officer · 2025-07-11

- Article by Glen Dickson (Information Display, 3 July 2025), republished in French by Aledia, quoting Felix Marchal and Yole analyst Eric Virey.
- After more than ten years with no product and no revenue, Aledia reached luminance and efficiency milestones; a new microLED fab was due to be fully operational by end of 2025 (last equipment received in June).
- Strategy under CEO **Pierre Laboisse** (replaced founder Giorgio Anania in September 2023): miniLED D-LED development stopped; two tracks, **FlexiNova** chips for direct-view displays (smartwatches, car displays) and a **native RGB microLED microdisplay for AR glasses**.
- FlexiNova: chips from 15 × 30 µm² down to 3.5 × 3.5 µm², on 200 mm GaN-on-silicon, offered in 6 V and 9 V versions; the 15 × 30 version is made compatible with panel makers such as BOE, AUO and Innolux. Samples targeted by December 2025, proof of concept for makers early 2026.
- AR RGB microdisplay: red is the main challenge; deliverable product hoped for by 2028, a first consumer version perhaps not before 2030.
- Funding: about $500 million raised to date, $200 million of it in the new fab; annual burn around $100 million per Virey; last round September 2023. A new raise in 2026, aimed at strategic investors including customers, to start mass production in 2027/28.

### [Can Aledia's nanowire technology break the MicroLED cost barrier? (CTimes, translated by Aledia)](https://www.aledia.com/actualites/la-technologie-a-nanofils-daledia-peut-elle-lever-le-verrou-du-cout-des-microled/)

Executive talk · Felix Marchal, Chief Sales & Marketing Officer · 2025-05-15

- CTimes interview (Lan Kuan-Ming, Touch Taiwan 2025) with **Felix Marchal**, Aledia's sales and marketing director, republished in French by Aledia.
- Pitch: microLED is held back by cost; Aledia grows GaN nanowires directly on silicon CMOS wafers, needs a single transfer step and can grow all three colours in one epitaxy run.
- **FlexiNOVA** answers integrators' trouble with tiny 3.5 µm chips: nanowires are grouped into chips of 15×30, 10×20 or 10×10 µm², flip-chip compatible, running at 6 V or 9 V; EQE above 40%.
- One 8-inch wafer yields over 100 million chips, the equivalent of 40 4K screens.
- Capacity plan: from 200 wafers per week today to 3,000 wafers per week by 2029–2030; new French fab operational in H2 2025; product samples for TFT panel makers by end 2025.
- AR smart glasses are a strategic outlet; several AR glasses makers have already approached Aledia; first products to be commercialised within two years.

### [Aledia commercially launches FlexiNova, its first product (press release)](https://www.aledia.com/app/uploads/2026/02/FR-Aledia-FlexiNOVA-FN1530F6-communique-de-presse-VF.pdf)

Report · 2026-01-26

- 26 January 2026: **FlexiNova**, Aledia's patented high-voltage microLED platform, is commercially available: the company's first product on the market.
- First product: a 3D-nanowire microLED running at **6 V**, chip size **15 µm × 30 µm**, made on **200 mm** silicon wafers (reference FN1530F6), presented by Aledia as a world industrial first.
- Roadmap: a full portfolio at 6 V or 9 V, chip sizes down to **3.5 µm** with no efficiency loss.
- Pitch to panel makers: high voltage cuts energy use, improves system efficiency and allows simpler, more reliable TFT panels; standard silicon fab processes for yield, uniformity and cost reduction at volume.
- Developed with long-time partner CEA-Leti and the France 2030 programme; first commercial demo shown privately at CES 2026.
- Contacts named: Felix Marchal (Chief Sales & Marketing Officer), Eric Butaud (Senior Director Product Marketing).

### [CSR Report 2025 (Rapport RSE 2025)](https://www.aledia.com/app/uploads/2026/06/Aledia-Bilan-Rapport-dActivite-RSE-2025.pdf)

Sustainability report · 2026-06-16

- Aledia: deep-tech born in CEA's labs, developing 3D nanowire-on-silicon microLEDs; ambition (CEO Pierre Laboisse) to become world leader in next-generation displays and relocate microLED production to Europe.
- Scale: **218 employees**, of whom **49 doctoral students**; 80% scientists, engineers and technicians; **248 active patent families**; 2 sites near Grenoble (Echirolles and the Champagnier fab, completed in 2024).
- Champagnier is a Seveso low-threshold site built on a reclaimed industrial brownfield; managed under ISO 14001, ISO 50001 and ISO 45001-based systems.
- First carbon footprint (2022, Echirolles): **16,066 t CO₂**, 86% from purchased inputs; a 2025 footprint including Champagnier is due in 2026.
- People: 93% of staff trained in 2025 (about 4,800 hours); 40% of 2025 hires were women vs 26% in 2024; gender equality index 86.
- Responsible purchasing launched in 2025: charter signed by 60% of strategic suppliers; the Purchasing Director is named, Pierre-Marie Penet.

## Questions about Aledia

### What does Aledia do?

Aledia develops and makes 3D nanowire microLEDs grown on silicon wafers for displays in AR glasses, wearables, automotive and TVs; its first product, FlexiNova, launched in January 2026.

### How many employees does Aledia have?

Aledia has 218 employees, including 49 doctoral students; 80% are scientists, engineers or technicians.

### How is Aledia funded?

Aledia has raised about $500 million to date, including EUR 120M in September 2023 from CEA Investissement, Supernova Invest, Braemar Energy Ventures, Bpifrance and France 2030; a new raise is planned in 2026.

### Who leads Aledia?

Pierre Laboisse, formerly of ams Osram, has been President & CEO since September 2023, succeeding founder Giorgio Anania, who stays on the board.

_Written by Tamtam from the company's own published documents listed above, read in full. Figures are as those documents state them, for the periods they name. (2026-11-17)_
