# EDAG Group account plan

> EDAG Group is an independent engineering service provider for vehicle, electronics and factory development, with €714.0 million of 2025 revenues.

## At a glance

EDAG Group, whose parent EDAG Engineering Group AG is based in Arbon, Switzerland and listed in Frankfurt's Prime Standard, calls itself one of the largest independent engineering service providers. It develops vehicles, modules, electrics/electronics and software, and plans production plants and complete factories, mainly for the international mobility industry but increasingly for defence, medical, energy and other industries. FY2025 revenues fell 13.1% to €714.0 million, with a net loss of €-43.7 million. Headcount was 7,666 at September 30, 2026, after two restructuring programmes. ATON Austria Holding GmbH holds 85.5% of the shares.

## Business units

- **Vehicle Engineering** (about 57% of 2025 segment revenues (€412.5 million)): Body engineering, vehicle integration, test vehicles and complete vehicle development from idea to prototype. 2025 revenues fell 13.0% on postponed projects and framework contracts not called off; in 9M 2026 revenues were €303.7 million with a 2.4% adjusted EBIT margin. Led by Thomas Klingner.
- **Electrics/Electronics** (about 28% of 2025 segment revenues (€204.9 million)): E/E architectures, integration and validation, software and digitalization, and functional safety and cybersecurity. Revenues fell 14.0% in 2025 on the slump in automotive demand for software; 9M 2026 revenues were €147.7 million with a 1.2% margin. Led by Dr. Gabriel Seiberth.
- **Production Solutions** (about 15% of 2025 segment revenues (€111.5 million)): Smart factory engineering, from production planning to complete factories, reorganised in 2026 into Planning Smart Factory, Engineering Smart Factory and Feynsinn. A €15 million write-down on a mobility project weighed on 2025; 9M 2026 revenues fell 35.8% to €58.2 million. Led by Dirk Keller.

## Strategic priorities

- **Diversification beyond automotive**: Four market-facing business units (Mobility, Defense, Industry, Public); revenue from customers outside the mobility industry was approx. €100 million in 2025, up around 21%, with a target above 30% of revenue.
- **Defence growth**: Defence is the main growth bet: software-defined defence, land systems and lifecycle engineering, a partnership with the State Command of Hesse, and support for a Land Rover fleet conversion for the German Armed Forces.
- **Global Delivery**: Moving standardized development work to lower-wage locations, particularly India, where a new Pune site took EDAG past 500 employees.
- **Profitability over growth**: Management says safeguarding profitability takes precedence over revenue growth, targeting a positive adjusted EBIT margin of up to approx. 3% in 2026.
- **AI in engineering**: The in-house GenAI platform DARE supports requirements engineering, code generation, model-based development and virtual validation.

## Latest results

In the first nine months of 2026 revenues fell 8.8% to €498.7 million, but adjusted EBIT recovered to €4.7 million (0.9% margin) from €-4.5 million, and the net loss narrowed to €-3.3 million. In Q3 2026 alone revenues were €164.4 million and the adjusted EBIT margin 2.7%. Order intake was €517.2 million (-7.2%) and orders on hand €358.2 million. FY2026 revenue guidance was cut to a decline of up to approx. 10%, while the adjusted EBIT margin is still expected positive up to approx. 3%.

## Investments and deals

- **Recapitalisation by ATON**: A €50 million capital increase in June 2026 and a €25 million mandatory convertible loan converted on September 22, 2026 provided €75 million; equity rose to €162.3 million.
- **Refinancing**: A three-year syndicated loan with five banks was signed on July 3, 2026, and the €51 million promissory note tranche due July 2026 was repaid.
- **India expansion**: A new site in Baner, Pune opened on July 1, 2026, and EDAG is adding 300 to 350 staff in India this year.
- **Site consolidation in Germany**: Regional offices were merged, including a new location in Böblingen, as part of restructuring that cut about 1,300 jobs in Germany.

## Challenges and risks

- **Weak automotive demand**: Automotive customers remain cautious under their own restructuring, call off less under framework agreements and increasingly develop in-house.
- **Price pressure from new providers**: Management cites massive margin pressure from new service providers, mostly from India.
- **Overstaffing risk**: Management could not rule out overstaffing in 2026 from call-offs not made under framework agreements; personnel expenses were 71.8% of 2025 revenues.
- **Production Solutions losses**: The segment had a -17.0% adjusted EBIT margin in 2025 and revenues down 35.8% in 9M 2026.
- **Financial risk**: Financial risks rose to class B in Q3 2026 and operative risks have been category A since Q1 2026.

## What leadership says

> "The year 2025 has made it clear that future viability must be shaped actively." — Harald Keller, CEO, EDAG Annual Report 2025, March 2026

> "Global Delivery is about more than just distributing development tasks across different locations." — Harald Keller, CEO, Half-Yearly Financial Report 2026, August 2026, on the new Pune site

> "Public-sector investment in security and defense is creating long-term growth prospects for specialized engineering services." — Holger Merz, CFO, Half-Yearly Financial Report 2026, August 2026

> "Stability cannot be achieved by waiting, but through consistent action." — Holger Merz, CFO, EDAG Annual Report 2025, March 2026


## Where a supplier can help

- **Defence partnerships**: Tied to the defence growth priority: defence system suppliers and public bodies needing vehicle, E/E and lifecycle engineering capacity in Germany.
- **Industrial customers**: Tied to diversification beyond automotive: medical, chemicals, energy and semiconductor firms needing product and factory engineering.
- **Delivery-centre enablement**: Tied to Global Delivery and the India expansion: collaboration, recruiting and tooling for distributed engineering teams.
- **Resource planning**: Tied to the overstaffing risk and the profitability priority: utilisation, workforce planning and project controlling tools.
- **AI and simulation software**: Tied to the DARE GenAI platform and virtual validation: AI, simulation and data platform partners.

_Tamtam's reading of the priorities and challenges above, not the company's own words._

## Key documents

### [EDAG Annual Report 2025](https://ir-api.eqs.com/media/document/b5f68481-4257-49e7-a650-3e5f9fd6114a/assets/EDAG_Annual_Report_2025_EN.pdf)

Annual report · 2026-03-26

- EDAG Group (parent EDAG Engineering Group AG, Arbon, Switzerland; listed in Frankfurt's Prime Standard since 2015) calls itself one of the largest independent engineering service providers, with about 30 international subsidiaries; ATON Austria Holding GmbH holds 74.66% of the shares.
- FY2025 was a loss year: revenues fell 13.1% to €714.0 million (2024: €822.0 million), order intake was €688.5 million (2024: €767.9 million), adjusted EBIT was €-12.9 million (-1.8% margin), EBIT €-42.1 million and the net loss €-43.7 million; no dividend proposed.
- Three reporting segments: Vehicle Engineering (€412.5 million revenues, adjusted EBIT margin 1.9%), Electrics/Electronics (€204.9 million, -0.9%) and Production Solutions (€111.5 million, -17.0%, hit by a €15 million write-down on a mobility project).
- German locations generated €510,666 thousand of the €713,601 thousand third-party sales revenue; headcount fell from 9,133 to 8,303 (5,205 in Germany) after another restructuring programme focused on Germany (restructuring effect on earnings €29.2 million).
- Strategy: diversify away from automotive into four market-facing business units (Mobility, Defense, Industry, Public); revenues from customers outside the mobility industry were approx. €100 million, up around 21%. Defense is singled out as the main growth bet, with a retired Lieutenant General elected to the Board.
- Efficiency levers: accelerated expansion of Global Delivery Centers, particularly in India, site consolidation in Germany, and the in-house GenAI platform DARE for requirements engineering, code generation and virtual validation.
- Balance sheet under strain: equity fell to €88.6 million (equity ratio 15.1%), cash to €42.9 million, net financial debt rose to €78.0 million; a €51 million promissory note tranche due July 2026 was to be refinanced through a syndicated loan.
- 2026 guidance: revenues within approx. +/-5%, adjusted EBIT margin positive up to approx. 3%, investment rate approx. 2 to 3%; management sees a risk of overstaffing in 2026 from framework agreements not being called off.

### [Report on the Third Quarter of 2026](https://ir-api.eqs.com/media/document/362abb19-ddcf-4549-b93e-4ea9765ffb28/assets/CH0303692047-Q3-2026-EQ-E-00.pdf)

Interim report · 2026-11-05

- 9M 2026 revenues €498.7 million, down 8.8% (9M 2025: €547.2 million); Q3 revenues €164.4 million (-8.9%).
- Profitability recovered: 9M adjusted EBIT €4.7 million (0.9% margin) vs €-4.5 million; Q3 adjusted EBIT margin 2.7%; 9M EBIT €3.9 million vs €-34.0 million, net loss only €-3.3 million.
- Vehicle Engineering held up (€303.7 million, -1.7%, adjusted margin 2.4%, order intake slightly up at €335.4 million); E/E €147.7 million (margin 1.2%); Production Solutions fell 35.8% to €58.2 million (margin -7.3%).
- Revenue guidance cut: FY2026 revenues now expected to fall by up to approx. 10% (was up to approx. 5%); adjusted EBIT margin still positive up to approx. 3%; "safeguarding profitability takes precedence over revenue growth".
- Reasons: continued caution from automotive customers under restructuring, a cautious industrial sector, fewer call-offs and customers doing more development in-house; "A full recovery in the fourth quarter is no longer expected".
- 9M order intake €517.2 million (-7.2%); orders on hand €358.2 million.
- ATON converted its €25 million loan on September 22, 2026 and now holds 85.5%; equity €162.3 million (equity ratio 29.3%), net financial debt €38.8 million, cash €26.0 million after repaying the €51 million promissory note tranche.
- Headcount 7,666 (Germany 4,508); Production Solutions reorganised into Planning Smart Factory, Engineering Smart Factory and Feynsinn; financial risks raised to class B.

### [Half-Yearly Financial Report 2026](https://ir-api.eqs.com/media/document/68873379-c621-4722-947f-4d67422e201e/assets/CH0303692047-Q2-2026-EQ-E-00.pdf)

Interim report · 2026-08-26

- H1 2026 revenues were €334.4 million, down 8.8% (H1 2025: €366.7 million), with declines in all three segments; Q2 revenues €162.6 million (-6.7%).
- Adjusted EBIT turned slightly positive at €0.3 million (0.1% margin) from €-7.6 million; EBIT €-3.3 million, net loss €-6.9 million (H1 2025: €-10.2 million).
- Segments: Vehicle Engineering €201.5 million (adjusted EBIT margin 2.0%), Electrics/Electronics €98.1 million (-0.7%), Production Solutions €42.1 million (-7.3%, revenues -29.2%).
- Order intake fell 11.3% to €363.0 million, but orders on hand rose to €372.6 million from €336.2 million at end-2025.
- ATON Austria Holding subscribed a €50 million capital increase at €4.00 per share and a €25 million mandatory convertible loan; equity rose to €157.6 million (equity ratio 25.5%) and net financial debt fell to €30.1 million.
- Refinancing completed: a three-year syndicated loan with five banks signed July 3, 2026; the July 2026 promissory note tranche was repaid on time.
- Headcount 7,800 (Germany 4,614); personnel expenses down 11.5% to €243.6 million. A new Pune site took India past 500 employees.
- Guidance kept at revenues +/-5% but now at the lower end (a decline), adjusted EBIT margin positive up to approx. 3%; operative risks raised to category A.

### [EDAG-CEO Keller: "Entscheidend ist nicht die Masse, sondern die Klasse" (Automobil Industrie)](https://www.automobil-industrie.vogel.de/edag-ceo-keller-entscheidend-ist-nicht-die-masse-sondern-die-klasse-a-0d3c381606fbff180d4d494d0f2823ca/)

Executive talk · Harald Keller, CEO (with Holger Merz, CFO) · 2026-06-08

- June 2026 joint interview of CEO Harald Keller and CFO Holger Merz with Automobil Industrie (in German; quotes below are our translations).
- Keller names three causes of the 2025 loss: €30 million more restructuring provisions, under-utilisation in many operating areas and "massive margin pressure", with new providers "mostly from India" pushing into the market.
- Merz: Vehicle Engineering closed positive, E/E slightly negative (dependent on framework contracts and facing Indian software players), Production Solutions took about €16 million of special effects from a loss-making project and a customer default.
- Framework contracts (e.g. €10 million) carry no obligation to call off; in a crisis OEMs fill their own capacity first.
- Every tender asks how much "Global Delivery" is built in; EDAG nearshores in Poland, Czechia and Hungary and adds 300 to 350 staff in India this year.
- Two restructuring packages cut about 1,300 jobs in Germany, saving roughly €90 million a year in personnel costs; sites consolidated in Munich (from twelve to one) and Ingolstadt, no services dropped.
- Non-automotive revenue will pass €100 million for the first time in 2026 after over 20% growth in 2025; target above 30% of revenue; focus on medical, chemicals, energy and defence, no pure temporary staffing.
- Keller: market "remains extremely tense", but EDAG is "much more crisis-resistant"; complete vehicle development is "the Champions League in engineering".

### [Harald Keller: "Das Mindset muss sich verändern" (Automobil Industrie)](https://www.automobil-industrie.vogel.de/harald-keller-das-mindset-muss-sich-veraendern-a-4fee26e27fbf426e0b452cd60f65d922/)

Executive talk · Harald Keller, CEO · 2025-06-27

- June 2025 interview of CEO Harald Keller with Automobil Industrie (in German; quotes are our translations), on the group's reorganisation and diversification.
- Keller recalls FY2024 adjusted EBIT of €31.1 million and €34.5 million of restructuring, and in mid-2025 expected market recovery only in the second half.
- New since the start of the year: Mobility Solutions (largest business), Industry Solutions (smart products, smart factories, Industrial Metaverse) and Public Solutions (cities, counties, states and municipal IT).
- Target industries include defence, medical devices, renewable energy, rail and semiconductors; "'Automotive only' will no longer be a viable concept."
- Outside automotive, local development is valued more and price is not the only criterion; in automotive tenders a low hourly rate matters more than faster time-to-market.
- EDAG China employs about 600 people, with more than a third of its business from local carmakers; India is a hub for software-defined vehicle, AI, cloud and simulation work.
- Keller's view of the industry: engineering service providers are moving from "extended workbench" to system competence and end-to-end responsibility; AI is applied in customer projects with measurable value.

## Questions about EDAG Group

### What does EDAG Group do?

EDAG is an independent engineering service provider covering vehicle development, electrics/electronics and software, and the planning of production plants and complete factories.

### What is EDAG Group's revenue?

FY2025 revenues were €714.0 million, down 13.1%. 9M 2026 revenues were €498.7 million, and FY2026 revenue is expected to decrease by up to approx. 10%.

### How many employees does EDAG Group have?

7,666 at September 30, 2026, of whom 4,508 in Germany, down from 8,303 at the end of 2025.

### What is EDAG Group's strategy?

Diversifying away from automotive into defence, industry and public sector work, expanding Global Delivery in India, using AI in engineering and putting profitability before revenue growth.

### Who leads EDAG Group?

Harald Keller has been CEO since July 1, 2024 and Holger Merz is CFO; Georg Denoke chairs the Board.

_Written by Tamtam from the company's own published documents listed above, read in full. Figures are as those documents state them, for the periods they name. (2026-11-17)_
