# Ultra Clean Technology account plan

> Ultra Clean Holdings (UCT, Nasdaq: UCTT) supplies semiconductor equipment subsystems and parts cleaning; FY2025 revenue $2,054.0 million, 7,411 staff.

## At a glance

Ultra Clean Holdings (UCT, Nasdaq: UCTT), headquartered in Hayward, California, develops and supplies critical subsystems, components and parts, plus ultra-high purity cleaning, coating and analytical services, primarily for the semiconductor industry. Its customers are semiconductor equipment makers and chipmakers; Lam Research (37.0%) and Applied Materials (21.7%) made 58.7% of FY2025 revenue, and 75.9% of revenue was international. FY2025 revenue was $2,054.0 million, down 2.1%, with a net loss attributable to UCT of $181.2 million after a $151.1 million goodwill impairment. It had 7,411 employees at December 26, 2025, with manufacturing in the US, Israel, China, Malaysia, Singapore, the UK, Thailand, the Philippines and Czechia; James Xiao has been CEO since September 2025.

## Business units

- **Products** (87.6% of FY2025 revenue ($1,799.3 million)): Designs and manufactures gas and fluid delivery systems, chemical delivery modules, precision robotics, process modules, frame assemblies, weldments and components for semiconductor equipment makers, chiefly Lam Research and Applied Materials. FY2025 revenue fell 2.9% and the segment posted an operating loss after a $77.6 million Fluid Solutions goodwill impairment; Q3 2026 revenue rose 53.2% to $681.9 million. Chris Cook, Chief Business Officer, joined in 2022 as President of the Products Business.
- **Services** (12.4% of FY2025 revenue ($254.7 million)): Ultra-high purity cleaning and coating of process tool chamber parts and micro-contamination analysis for device makers and equipment makers, from facilities in the U.S., Ireland, Israel, Taiwan, South Korea, Singapore and China. FY2025 revenue rose 4.4%, and Q3 2026 revenue rose 18.6% to $77.1 million; double-digit growth is expected in 2026 and 2027. It is led by Sam Johnson, Head of the Services Division since August 15, 2025.

## Strategic priorities

- **Ramp readiness for the AI cycle**: Under UCT 3.0, UCT is building capacity ahead of demand: about $4 billion of revenue capacity expected in Q1 2027 plus 15% to 20% burst capacity, and a $5 billion run rate targeted in H2 2028.
- **20% gross margin at $4 billion revenue**: The margin target is unchanged at 20% gross margin at $4 billion of revenue, through utilization, higher-value engineered products, vertical integration and lower-cost regions; Q3 2026 non-GAAP gross margin was 17.3%.
- **NPX co-innovation and build-to-spec**: The NPX Center of Excellence in Hillsboro, Oregon has produced 8 new program wins across etch, ALD, PVD and lithography, as UCT moves from build-to-print to build-to-spec, with production expected on customers' next nodes in the next 2 to 3 years.
- **Grow Services share**: UCT aims to gain share in outsourced cleaning and coating, with Services growth expected to accelerate as U.S., Korean and Taiwanese fabs ramp.
- **Diversify beyond the top two customers**: The top two customers' share fell from 64% to the high 50% range as UCT diversifies; it also sees openings as customers expand into optical inspection and metrology, and in the sub-fab.
- **Digital transformation**: UCT is modernizing systems, processes and data, starting with quote-to-fulfill and an integrated planning platform linking demand, supply, inventory and capacity in real time.

## Latest results

Q3 2026 (13 weeks to September 25, 2026) revenue was a record $759.0 million, up 48.8% year on year and 18% on Q2 2026; Products reached $681.9 million (+53.2%) and Services $77.1 million (+18.6%). GAAP gross margin was 16.9%, operating margin 7.1% and net income attributable to UCT $39.1 million ($0.85 diluted), against a loss of $10.9 million a year earlier; non-GAAP EPS was $1.15. Nine-month revenue was $1,937.6 million (+25.2%), but operating cash flow was -$116.7 million as inventories rose to $723.3 million. For Q4 2026 UCT guides revenue of $800 million to $860 million and non-GAAP EPS of $1.11 to $1.35.

## Investments and deals

- **Southeast Asia and Europe capacity**: 26,000 sq ft of cleanroom in Malaysia came online early; UCT plans to double weldment capacity in Cebu, Philippines, add cleanroom in Singapore and Czechia, and double vertically integrated manufacturing in Malaysia and Thailand next year.
- **Capacity for a $5 billion run rate**: Reaching $5 billion-plus needs roughly $80 million to $100 million of incremental investment through 2027 and 2028, with a new Southeast Asia expansion under evaluation.
- **Refinancing**: On March 3, 2026 UCT issued $600.0 million of 0% Convertible Senior Notes due 2031 and repaid the term loan in full; the revolver was raised to $250.0 million to 2031, and a $400.0 million at-the-market equity program started August 14, 2026.
- **Inventory and supply commitments**: Inventories rose $332.4 million in nine months to $723.3 million, including preordered critical components and safety stock; inventory purchase commitments reached about $1,111.0 million.
- **Capex and ERP**: FY2025 capex was $50.3 million, mainly manufacturing facilities and the ongoing new ERP system; nine-month 2026 capex was $45.3 million.

## Challenges and risks

- **Customer concentration**: Lam Research and Applied Materials made 61.1% of Q3 2026 revenue; these customers have strong negotiating leverage and can take subsystems back in-house.
- **Cyclical demand and working capital**: Semiconductor capital spending is cyclical with limited visibility, and the current ramp has driven negative operating cash flow (-$116.7 million over nine months) from inventory build.
- **Component shortages**: Mass flow controller constraints flagged by the largest customer may continue for a quarter or 2, and double-digit quarterly industry growth will cause excursions in the supply chain.
- **U.S.-China trade policy**: Expanded export license requirements and over 140 Chinese entities added to the Entity List since December 2024 weigh on China; China revenue fell to $143.1 million in FY2025 from $214.7 million.
- **Tax and convertible debt**: Pillar Two minimum tax applies from fiscal 2026 in Singapore and Malaysia, and the $600.0 million convertible notes could require cash settlement if the conversion trigger is met.

## What leadership says

> "UCT delivered another strong quarter of growth and solid operational performance, as we responded with speed and agility to scale production and meet accelerating customer demand" — James Xiao, Chief Executive Officer, Ultra Clean Q3 2026 results press release, October 27, 2026

> "we now expect 2027 wafer fab equipment spending to be above $200 billion." — James Xiao, Chief Executive Officer, UCT Q3 2026 earnings call, October 27, 2026

> "execution speed and innovation velocity at scale will set UCT apart from the competition." — James Xiao, Chief Executive Officer, UCT Q2 2026 earnings call, August 3, 2026

> "We continue to see a path to our target of 20% gross margin at $4 billion of revenue" — Mike Keogh, Chief Financial Officer, UCT Q3 2026 earnings call, October 27, 2026


## Where a supplier can help

- **Cleanroom and factory build-out**: Tied to the Southeast Asia and Europe capacity investments: cleanroom additions in Malaysia, Singapore and Czechia and doubled weldment capacity in Cebu need construction, cleanroom equipment, tooling and staffing partners.
- **Planning and supply-chain software**: Tied to the digital transformation priority and component shortages: the integrated planning platform and quote-to-fulfill work suit vendors of supply-chain planning, analytics and ERP services.
- **Critical component supply**: Tied to the mass flow controller constraints and the about $1,111.0 million of purchase commitments: second-source suppliers of components and materials can help UCT keep capacity ahead of demand.
- **Margin-improvement tooling**: Tied to the 20% gross margin target: automation, yield and factory-efficiency solutions support utilization gains in lower-cost regions.
- **Working capital financing**: Tied to the cyclical demand and working capital challenge: with inventories at $723.3 million and negative operating cash flow, receivables, inventory financing and treasury tools are relevant.

_Tamtam's reading of the priorities and challenges above, not the company's own words._

## Key documents

### [Annual Report on Form 10-K for fiscal year 2025 (ended December 26, 2025)](https://www.sec.gov/Archives/edgar/data/1275014/000162828026010744/uctt-20251226.htm)

Annual report · 2026-02-23

- Ultra Clean Holdings (UCT, Nasdaq: UCTT, Hayward, California) develops and supplies critical subsystems, components, parts and ultra-high purity cleaning and analytical services, primarily for the semiconductor industry; it reports two segments, Products and Services.
- FY2025 (52 weeks to December 26, 2025) revenue was $2,054.0 million, down 2.1% from $2,097.6 million; Products $1,799.3 million (87.6% of revenue, down 2.9%) and Services $254.7 million (12.4%, up 4.4%).
- Gross margin fell to 15.7% (17.0% in FY2024); a $151.1 million non-cash goodwill impairment in Q2 2025 ($77.6 million Fluid Solutions, $73.5 million Services) drove an operating loss of $107.4 million and a net loss attributable to UCT of $181.2 million.
- Extreme customer concentration: Lam Research (37.0%) and Applied Materials (21.7%) together made 58.7% of FY2025 revenue; about 95.7% of revenue came from the semiconductor industry.
- 75.9% of revenue is international; Singapore ($754.0 million) is the largest destination, ahead of the United States ($495.4 million), Austria ($221.5 million) and China ($143.1 million, down from $214.7 million).
- 7,411 employees at December 26, 2025 (4,778 in direct manufacturing; 3,772 in Asia Pacific and 1,663 in EMEA), with manufacturing in the US, Israel, China, Malaysia, Singapore, the UK, Thailand, the Philippines and Czechia.
- Strategy: win more outsourced subsystems and cleaning/coating share with OEMs and IDMs, move into the sub-fab, use lower-cost regions, strengthen vertical integration and pursue selective acquisitions.
- New leadership: James Xiao (ex-Applied Materials) CEO since September 2025; Robert Wunar (ex-Applied Materials) COO effective March 23, 2026; restructuring included involuntary separations and a voluntary early retirement program.
- Balance sheet at year-end: $311.8 million cash, $481.4 million U.S. Term Loan due February 2028; capex $50.3 million; a renewed $150.0 million share repurchase program; material weaknesses reported earlier were remediated by December 26, 2025.
- Key risks: cyclical semiconductor capital spending, customer leverage and concentration, U.S.-China export controls (over 140 Chinese entities added to the Entity List since December 2024), tariffs, and Pillar Two taxes in Singapore and Malaysia from fiscal 2026.

### [Quarterly Report on Form 10-Q for Q3 2026 (quarter ended September 25, 2026)](https://www.sec.gov/Archives/edgar/data/1275014/000162828026067880/uctt-20260925.htm)

Interim report · 2026-10-28

- Q3 2026 (13 weeks to September 25, 2026) revenue was $759.0 million, up 48.8% from $510.0 million; Products $681.9 million (+53.2%) and Services $77.1 million (+18.6%).
- Nine-month revenue reached $1,937.6 million (+25.2%); Products 88.8% and Services 11.2% of the total.
- Q3 gross margin 16.9% (Products 15.6%, Services 28.8%); operating profit $53.7 million (7.1% margin) versus $10.6 million a year earlier; net income attributable to UCT $39.1 million ($0.85 diluted).
- Lam Research (38.8%) and Applied Materials (22.3%) made 61.1% of Q3 revenue; Malaysia revenue jumped to $129.5 million from $19.3 million and Singapore to $225.2 million.
- Financing reshaped: $600.0 million of 0% Convertible Senior Notes due 2031 issued March 3, 2026, term loan repaid in full, revolver raised to $250.0 million to 2031, and a $400.0 million at-the-market equity program from August 14, 2026 ($34.0 million raised in Q3, $169.1 million more through October 28).
- Working capital build: inventories rose $332.4 million in nine months to $723.3 million; nine-month operating cash flow was -$116.7 million; inventory purchase commitments reached about $1,111.0 million.
- Nine-month tax included discrete charges of $15.1 million (China subsidiary distribution) and $9.6 million (ownership change of a foreign subsidiary).

### [Ultra Clean Reports Third Quarter 2026 Financial Results (press release)](https://www.sec.gov/Archives/edgar/data/1275014/000162828026067578/q32026pressrelease.htm)

Interim report · 2026-10-27

- Record Q3 2026 revenue of $759 million, up 18% on Q2 2026 and 49% on Q3 2025; Products $681.9 million and Services $77.1 million.
- GAAP gross margin 16.9%, operating margin 7.1%, net income $39.1 million or $0.85 per diluted share (Q2 2026: revenue $644.9 million, net income $8.7 million, $0.19).
- Non-GAAP gross margin 17.3%, operating margin 9.0%, net income $53.2 million or $1.15 per diluted share (Q2: 16.7%, 7.0%, $0.70).
- Q4 2026 outlook: revenue of $800 million to $860 million; GAAP EPS $1.02 to $1.26, non-GAAP EPS $1.11 to $1.35.
- CEO James Xiao frames the quarter as scaling production to meet accelerating customer demand and positions UCT to capture value from the AI-driven industry expansion through UCT 3.0.
- Balance sheet at September 25, 2026: cash $270.9 million, inventories $723.3 million (from $390.9 million), long-term debt $635.1 million.

### [UCT Q3 2026 earnings call transcript](https://www.fool.com/earnings/call-transcripts/2026/10/28/ultra-clean-holdings-uctt-q3-2026-earnings-call-transcript/)

Executive talk · James Xiao, Chief Executive Officer · 2026-10-27

- Record Q3 2026 revenue of $759 million, up 17.7% sequentially and 48.8% year over year; non-GAAP gross margin 17.3%, operating margin 9.0%, EPS $1.15. First call of CFO Mike Keogh, who joined in August.
- Mix: semiconductor products 86% of revenue (52% foundry and logic, 34% memory), Services 10%, non-semiconductor 4%; the two largest customers contributed 61%.
- James Xiao: based on customer visibility, UCT now expects 2027 wafer fab equipment spending above $200 billion; analysts' $250 billion for 2028 is seen as reasonable.
- Capacity: about $4 billion of revenue capacity expected in Q1 2027 plus 15% to 20% burst capacity; reaching $5 billion-plus needs roughly $80 million to $100 million of incremental investment through 2027 and 2028.
- Expansion steps: 26,000 sq ft of cleanroom in Malaysia came online early; weldment capacity in Cebu, Philippines to double; more cleanroom in Singapore and Czechia; vertically integrated manufacturing in Malaysia and Thailand to double next year.
- NPX: 8 new program wins across etch, ALD, PVD and lithography from the Hillsboro Center of Excellence; shift from build-to-print to build-to-spec.
- Margin target unchanged: 20% gross margin at $4 billion of revenue.
- Q4 2026 guide: revenue $800 million to $860 million, EPS $1.11 to $1.35 on about 48.9 million diluted shares; mass flow controller constraints may last "a quarter or 2".

### [UCT Q2 2026 earnings call transcript](https://allmind.ai/earnings/event/2939003)

Executive talk · James Xiao, Chief Executive Officer · 2026-08-03

- Q2 2026 call (August 3, 2026): record revenue of $644.9 million (Q1: $533.7 million), Products $572.7 million and Services $72.2 million; non-GAAP gross margin 16.7%, operating margin 7%, EPS $0.70.
- Leadership change: CFO Sheri Savage's last call after 17 years; Michael Keough announced as CFO from August 5.
- James Xiao: customers are extending forecasts and planning horizons; "execution speed and innovation velocity at scale will set UCT apart from the competition."
- Capacity: 26,000 sq ft of new cleanroom in Malaysia plus Singapore and Czechia expansions to support a $4 billion annualized run rate (about $200 billion WFE) in H1/mid-2027; about $3.5 billion of capacity ready by end of 2026; $5 billion run rate targeted in H2 2028 via a new Southeast Asia expansion under evaluation.
- Margin goal unchanged: $4 billion revenue at 20% gross margin; gross margin seen moving toward the 17% range through the rest of 2026.
- UCT 3.0 pillars: ramp readiness, NPX (first Center of Excellence in Hillsboro, Oregon) and digital transformation.
- Top two customers fell from 64% to the high 50% range of revenue as UCT diversifies; Services expected to grow double digits in 2026 and 2027, accelerating as U.S., Korean and Taiwanese fabs ramp.
- No delivery push-outs from component shortages thanks to an early ramp readiness campaign; operating cash flow -$41.1 million on inventory build.

## Questions about Ultra Clean Technology

### What does Ultra Clean Technology do?

UCT develops and supplies critical subsystems, components and parts for semiconductor equipment makers, and ultra-high purity cleaning, coating and analytical services for chipmakers. About 95.7% of FY2025 revenue came from the semiconductor industry.

### What is Ultra Clean Technology's revenue?

FY2025 revenue was $2,054.0 million, down 2.1%. Q3 2026 revenue was a record $759.0 million, up 48.8%, and Q4 2026 is guided at $800 million to $860 million.

### How many employees does Ultra Clean Technology have?

7,411 employees at December 26, 2025, including 4,778 in direct manufacturing; 3,772 were in Asia Pacific and 1,663 in EMEA.

### What is UCT's strategy?

Through UCT 3.0 (ramp readiness, NPX co-innovation and digital transformation), UCT is building capacity toward a $4 billion and then $5 billion run rate while targeting 20% gross margin at $4 billion of revenue.

### Who leads Ultra Clean Technology?

James Xiao has been CEO since September 2025; Mike Keogh became CFO in August 2026, and Robert Wunar is COO effective March 23, 2026.

_Written by Tamtam from the company's own published documents listed above, read in full. Figures are as those documents state them, for the periods they name. (2026-11-17)_
