3D Systems Corporation account plan
hardware software materials services
At a glance
3D Systems makes 3D printers, materials and parts for healthcare and industrial customers: $386.9 million FY2025 revenue, 1,418 employees.
3D Systems Corporation is a US 3D printing and digital manufacturing company selling plastic and metal printers, mostly proprietary materials, software and services such as maintenance, advanced manufacturing and applications engineering. It serves dental, medical, aerospace, defense, automotive, energy, semiconductor and jewelry customers through Healthcare Solutions and Industrial Solutions, selling directly and through channel partners in the Americas, EMEA and APAC. FY2025 revenue was $386.9 million, down 12.1%, with a loss from operations of $96.1 million but net income of $29.9 million thanks to a $139.6 million gain on divestitures. Headcount fell to 1,418 employees at end-2025 from 1,833.
Business units
Healthcare Solutions
about 46% of FY2025 revenue ($179.6 million)3D printing for dental (aligner materials, nightguards, crowns and bridges, jetted dentures), medical technology (surgical planning, patient-specific implants, guides) and regenerative medicine R&D. FY2025 revenue fell 5.3%, but Q3 2026 revenue grew 14.4% to $49.0 million on dental materials and parts manufacturing. Two customers in this segment made up 12.2% and 11.4% of FY2025 company revenue.
Industrial Solutions
about 54% of FY2025 revenue ($207.3 million)Printers, materials and parts for aerospace and defense, data center infrastructure, automotive, jewelry and general manufacturing. FY2025 revenue fell 17.2% on service bureaus, jewelry and the Geomagic, 3DXpert and Oqton divestitures; Q3 2026 revenue rose to $50.3 million, with aerospace and defense up more than 50%.
Strategic priorities
- Four strategic markets
- Medical technology, dental, aerospace and defense, and data center infrastructure grew nearly 30% in Q3 2026 and nearly 25% year-to-date.
- Metal printing and casting patterns
- Growth in direct metal printing (DMP Flex 350 Triple, DMP 500, larger platforms beyond concept) and printed patterns for investment casting, a market estimated at about $20 billion a year.
- Dentures roll-out
- The NextDent 300 denture solution, FDA-cleared and EU MDR approved in Q2 2026, is expected in more than 100 labs by year-end with more than $2 million of recurring revenue; US revenue potential exceeds $150 million annually.
- Higher gross margins
- Management says the key to profitability is getting gross margins up through consumables pull-through and metal parts; non-GAAP gross margin reached 35.5% in Q3 2026.
- Lean cost base
- The cost initiative delivered a little more than $60 million of annualized savings; Q3 2026 non-GAAP opex was $36.1 million, down nearly 15%.
Latest results
In Q3 2026 (quarter to September 30, 2026) revenue rose 8.8% to $99.3 million (10.9% on an adjusted basis excluding 2025 divestitures), with Healthcare Solutions at $49.0 million and Industrial Solutions at $50.3 million. Gross margin rose to 35.0% from 32.3%, but loss from operations widened to $24.5 million after a $12.5 million accrual for the Intrepid Automation jury verdict, and net loss was $33.5 million. Adjusted EBITDA was positive at $3.1 million. Nine-month revenue was $289.4 million (+3.1%) and operating cash burn fell to $17.5 million from $73.1 million. Q4 2026 guidance is revenue of $100-103 million and Adjusted EBITDA between negative $2 million and breakeven.
Investments and deals
- Software divestitures
- Geomagic was sold to Hexagon on April 1, 2025 for $119.4 million, and 3DXpert and Oqton to Hubb Global Holdings on October 31, 2025 for $3.3 million in cash plus a royalty.
- Metal parts capacity in Littleton
- An additional 50,000 square feet of metal parts capacity opened in Littleton, Colorado, taking metal printing space from about 220,000 to over 270,000 square feet.
- Meter-scale metal printer
- With US government support the company is developing a US-built printer for components over one meter, and signed a CRADA with Savannah River National Laboratory on fission and fusion materials.
- Capital raising and debt exchange
- A $53.8 million gross equity raise in 2026, then an at-the-market program and a planned exchange of the 2030 secured notes into unsecured notes due 2031 to fund growth.
Challenges and risks
- Customer concentration
- Two Healthcare customers represented 12.2% and 11.4% of FY2025 revenue.
- Weak consumer-facing industrial markets
- Jewelry and service bureaus remain a headwind, more competitive with Chinese products and hurt by the war in the Middle East and inflation.
- Litigation and controls
- A jury found 3D Systems liable in the Intrepid Automation counterclaims ($12.5 million accrued), and disclosure controls were not effective at September 30, 2026 due to material weaknesses.
- Liquidity and covenants
- Cash was $91.3 million plus $27.1 million of short-term investments at September 30, 2026, against $92.0 million of 2030 Notes and a covenant to keep at least $20.0 million of qualified cash.
- CEO succession
- Jeffrey Graves will step down once a successor is found; the board search was still under way at the Q3 2026 call.
What leadership says
“A major theme clearly emerging this year is the return of capital spending by our customers in key markets”
“the key to profitability for us is getting our gross margins up”
“The strategy we have discussed today remains the right strategy for 3D Systems.”
Where a supplier can help
- Supply for metal printing growth
- Tied to the metal printing priority and the Littleton expansion: metal powder, post-processing, inspection and facility equipment suppliers fit the growing metal parts capacity.
- Partners in aerospace, defense and data centers
- Tied to the four strategic markets: foundries, defense integrators and semiconductor or cooling equipment makers can co-develop applications with 3D Systems.
- Dental lab channel
- Tied to the dentures roll-out to more than 100 labs: dental distributors, lab software and training partners can speed adoption.
- Finance, legal and controls remediation
- Tied to the material weaknesses, litigation and capital raising challenges: audit, controls, legal and treasury advisers.
- Electronics component sourcing
- Tied to denture growth being rate limited by electrical components going into data centers: component distributors and supply chain services.
Tamtam's reading of the priorities and challenges above, not the company's own words.
Selling to companies like 3D Systems Corporation?
Tamtam finds the companies that match your ideal customer, researches each account and tells you who to contact and when.
Find similar companiesKey documents
Read in full by Tamtam; each summary links to the document itself.
- Form 10-K for the fiscal year ended December 31, 2025
- 3D Systems is a US 3D printing and digital manufacturing company (printers for plastics and metals, proprietary materials, software, maintenance, advanced manufacturing and applications engineering) with more than 35 years of experience; two reportable segments, Healthcare Solutions and Industrial Solutions.
- FY2025 revenue was $386.9 million, down 12.1% from $440.1 million, driven by lower materials volume in dental, service bureaus and jewelry and by divestitures; products $223.4 million, services $163.5 million.
- Gross margin fell to 33.9% (37.3% in 2024); loss from operations was $96.1 million, but a $139.6 million gain on disposition (Geomagic sold to Hexagon for $119.4 million; 3DXpert and Oqton sold to Hubb) produced net income of $29.9 million.
- Healthcare Solutions revenue $179.6 million (-5.3%); Industrial Solutions $207.3 million (-17.2%), with growth in aerospace and defense offsetting part of the decline.
- Heavy customer concentration: two Healthcare customers represented 12.2% and 11.4% of FY2025 revenue.
- Cost cuts under the 2025 Restructuring Plan: SG&A down 23.2% to $161.3 million, R&D down 24.8% to $65.0 million; headcount fell from 1,833 to 1,418 employees.
- Balance sheet reshaped: $92.0 million of 5.875% convertible senior secured 2030 Notes issued, 2026 Notes largely repurchased or exchanged ($3.9 million left); cash $95.6 million at year-end; covenant to keep at least $20.0 million of qualified cash.
- Revenue by region: Americas $224.5 million, EMEA $135.8 million, APAC $26.6 million; operating cash outflow $87.8 million in 2025.
- Form 10-Q for the quarter ended September 30, 2026
- Q3 2026 (quarter to September 30, 2026) revenue was $99.3 million, up 8.8% from $91.2 million; nine-month revenue $289.4 million, up 3.1%.
- Healthcare Solutions grew 14.4% in Q3 to $49.0 million on higher dental materials volume (including a key customer) and parts manufacturing; Industrial Solutions rose 3.9% to $50.3 million.
- Gross margin rose to 35.0% from 32.3% in Q3; nine-month gross margin 35.8%, helped by about $2.6 million of recovered tariffs.
- Q3 loss from operations widened to $24.5 million, mainly from a $12.5 million accrual after an unfavorable jury verdict in the Intrepid Automation trade-secret counterclaims; net loss $33.5 million in Q3.
- R&D fell 37.2% in Q3 and 44.1% over nine months as restructuring savings flowed through.
- Liquidity: cash $91.3 million plus $27.1 million of short-term investments; $53.8 million gross equity raise during the year; nine-month operating cash burn cut to $17.5 million from $73.1 million.
- Debt: $92.0 million of 2030 Notes and $3.9 million of 2026 Notes maturing November 15, 2026; disclosure controls still not effective due to material weaknesses.
- The securities class action was voluntarily dismissed on August 24, 2026; SEC investigation in settlement discussions, penalty fully accrued.
- Q3 2026 earnings call transcript
- CEO Jeffrey Graves said Q3 2026 revenue grew at double-digit rates year-over-year excluding the 2025 software divestitures, with positive Adjusted EBITDA again; CFO Phyllis Nordstrom gave revenue of $99.3 million, up 10.9% on an adjusted basis, and Adjusted EBITDA of $3.1 million.
- Four strategic markets drive growth: medical technology, dental, aerospace and defense, and data center infrastructure; together they grew nearly 30% in the quarter and nearly 25% year-to-date.
- Aerospace and defense revenue grew more than 50% in Q3 (excluding an Air Force development program); it is the largest industrial market, up more than 30% year-to-date.
- Two growth drivers in metal: direct metal printing (DMP Flex 350 Triple, DMP 500, larger 600-800 mm and meter-scale platforms beyond concept) and printed patterns for investment casting (SLA 825 Dual, MJP 300W Plus), a market estimated at about $20 billion a year.
- Opened an additional 50,000 square feet of metal parts capacity in Littleton, Colorado; the large rocketry casting order from Q2 is "filled and flying".
- Non-GAAP gross margin 35.5% (+420 bp); non-GAAP opex $36.1 million, down nearly 15%; cash and investments $120.5 million, debt $96 million.
- Since quarter end: an at-the-market equity program and a planned exchange of the 2030 secured notes into unsecured notes due 2031 plus cash and stock, to fund growth.
- Q4 2026 guidance: revenue $100-103 million, Adjusted EBITDA between negative $2 million and breakeven; the board is still searching for Graves's successor.
- Q2 2026 earnings call transcript (leadership transition announced)
- Q2 2026 call (August 4, 2026) came with the start of a CEO leadership transition: Jeffrey Graves will conclude his service as CEO once a successor is found, after more than 6 years.
- Revenue was $94.6 million (+1.4% excluding the 2025 software divestitures); printer sales rose more than 45%, with DMP 350 up roughly 90% and SLA 825 roughly 125%.
- Healthcare Solutions $48.1 million (+6.8%), the largest segment; Industrial Solutions $46.5 million (-3.7%) after closing a non-core product offering.
- One of the largest industrial printer orders in company history: SLA 825 systems for casting patterns for next-generation reusable rocket engines.
- Dentures (NextDent 300, FDA-cleared, EU MDR approved in Q2): expected in more than 100 labs by year-end, more than $2 million of annual recurring revenue; US revenue potential above $150 million a year.
- Data center infrastructure: semiconductor and HPC business grew almost 30%; new research agreement (CRADA) with Savannah River National Laboratory on fission and fusion materials; a meter-scale US-built metal printer under development.
- Metal parts capacity growing from about 220,000 to over 270,000 square feet (Littleton expansion); 77 metal printers in production.
- Cost programme complete at a little more than $60 million of annualized savings; Adjusted EBITDA negative $800,000; net equity offering just over $53 million; Q3 guidance $96-99 million revenue.
Questions about 3D Systems Corporation
What does 3D Systems do?
It sells 3D printers for plastics and metals, proprietary materials, software and services, and makes parts for customers in healthcare and industrial markets.
What is 3D Systems' revenue?
FY2025 revenue was $386.9 million, down 12.1%. Q3 2026 revenue was $99.3 million, up 8.8%.
How many employees does 3D Systems have?
1,418 employees at end-2025, down from 1,833 a year earlier.
What is 3D Systems' strategy?
Grow in medical technology, dental, aerospace and defense, and data center infrastructure, push metal printing and casting patterns, and raise gross margins on a lean cost base.
Who leads 3D Systems?
Jeffrey A. Graves has been President and CEO since May 2020 and will step down once a successor is found; Phyllis Nordstrom is Interim CFO.
Written by Tamtam from the company's own published documents listed above, read in full. Figures are as those documents state them, for the periods they name. (2026-11-17)