Tamtam Try Tamtam free
Alleima logo

Alleima account plan

Manufacturing stainless steel products

At a glance

Alleima is a Swedish maker of advanced stainless steels, special alloys, industrial heating and medical wire, with FY2025 revenues of SEK 18,630 million.

Alleima develops and manufactures high value-added products in advanced stainless steels and special alloys, industrial heating products and ultra-fine medical wire, on a fully integrated value chain from melting to finishing. It sells in more than 80 countries to Oil and Gas (23% of 2025 revenues), Industrial, Chemical and Petrochemical, Industrial Heating, Medical, Nuclear and other segments, with the USA, China and Sweden its largest markets. In FY2025 revenues were SEK 18,630 million (19,691) and adjusted EBIT SEK 1,555 million (margin 8.3%), with a total workforce of about 6,800. Alleima is listed on Nasdaq Stockholm; Industrivärden (21.09%) and Lundbergföretagen (10.04%) are the largest shareholders.

Business units

Strategic priorities

Shift to prioritized segments
Capital goes to Nuclear, Chemical and Petrochemical, Medical, Industrial Heating and Hydrogen and Renewable Energy, which were 43% of revenues in 2025 against an ambition of 45-50% by 2030.
Nuclear capacity
Reopening the Sandviken steam generator tube plant raises capacity by about 60%, with first deliveries scheduled for late 2026; Alleima supplies tubes for SMRs and booked orders for Sizewell C in the UK.
Cost discipline
A cost programme launched in October 2025 targets annual savings of approximately SEK 200 million with full effect by the end of 2026; it contributed approximately SEK 40 million in Q3 2026.
Local-for-local growth in Asia
Alleima completed a new Tube line in Zhenjiang, China, and is investing SEK 220 million in Mehsana, India, for Chemical and Petrochemical and CNG tubing, as part of a strategy built on technology leadership and locally produced premium.
Financial targets
Organic growth in line with or above targeted end-markets, an adjusted EBIT margin above 9% on average over a cycle, net debt/equity below 0.3x and a 50% average payout.
Sustainability
Scope 1 and 2 CO2 down more than 54% by 2030 (SBTi-approved), TRIFR down more than 50% by 2030 vs 2019, and more than 80% recycled steel (82.3% in Q3 2026).

Latest results

In Q3 2026 (published October 26, 2026) revenues were SEK 4,257 million (4,222), +1% but -2% organic, and rolling 12-month order intake was SEK 17,976 million, -4%, after an OCTG order of approximately SEK 250 million was cancelled. Adjusted EBIT was SEK 202 million (197), a margin of 4.8% (4.7), and free operating cash flow rose to SEK 373 million (285). Kanthal carried earnings while Tube's margin fell to 1.4% and Strip lost money. For the nine months, revenues were SEK 13,729 million (-3%) and adjusted EBIT SEK 1,107 million, margin 8.1% (8.4). For Q4 2026 Alleima expects OCTG under-absorption and a lower nuclear production rate to weigh, a positive currency effect of approximately SEK 100 million on EBIT, and 2026 capex of approximately SEK 1,000 million.

Investments and deals

Sandviken nuclear tube mill
Reopening of Tube Mill 68 for steam generator tubes, raising capacity by about 60% toward end-2026.
Mehsana, India
SEK 220 million for further processing and finishing for Chemical and Petrochemical, CNG fuel system and hydraulic and instrumentation tubing, announced with the Q3 2026 report.
Medical and Industrial Heating capacity
A medical wire plant in Malaysia, Industrial Heating expansions in Japan, the US and Scotland, and the Endox acquisition (medical) completed January 14, 2025 for a net cash outflow of SEK 147 million.
Capex level
Capex was SEK 1,089 million in FY2025 and is guided at approximately SEK 1,000 million for 2026, cut from SEK 1,100 million for timing reasons.
Electric process gas heating
The Prothal electric process gas heater, in partnership with Danieli, has a first commercial pilot for Emsteel's DRI plant in Abu Dhabi, with an aim of a commercial solution of several hundred megawatts by 2027.

Challenges and risks

Stalled OCTG market
Oil and Gas is the largest segment, and OCTG weakened with the Middle East conflict, causing under-absorption in Tube and an order cancellation of approximately SEK 250 million.
Nuclear execution
Lower-than-planned nuclear production in Q3 2026 came from one fixed-price order in an unusual steam generator tube dimension.
Weak short-cycle and European demand
Industrial is weak and Europe-dependent, Chemical and Petrochemical is weaker in China, and Europe faces higher energy costs.
Tariffs, currency and geopolitics
Negative currency effects of SEK 341 million hit FY2025 adjusted EBIT, and US import tariffs and the conflict around Iran are flagged as risks to supply chains, trade flows and energy and transport costs.
Production disruptions
A summer press replacement in Sandviken in 2025 caused ramp-up problems that hurt Q3 and Q4 revenues and profitability.

What leadership says

“Our strong financial position has enabled us to be selective and strategic in our order intake”

Göran Björkman, President and CEO · CEO statement, Alleima Annual Report 2025, March 2026

“You can never beat Chinese players on cost. Instead, we focus on technology leadership and locally produced premium.”

Göran Björkman, President and CEO · EFN interview, December 23, 2025 (translated from Swedish)

“That area is 20-30 percent of Kanthal's heating business and the one growing fast.”

Göran Björkman, President and CEO · On semiconductor and data center heating, Nyhetsbyrån Direkt interview, October 26, 2026 (translated from Swedish)

“The margin was 4.8 percent, in line with last year, but is not where I think we should be.”

Göran Björkman, President and CEO · Nyhetsbyrån Direkt interview after the Q3 2026 report, October 26, 2026 (translated from Swedish)

Where a supplier can help

Plant uptime and absorption
Under-absorption in Tube and the Sandviken ramp-up problems point to maintenance, automation and production-planning suppliers that help a high-fixed-cost mill run steadily.
Capacity projects in India, Malaysia and Sweden
The Mehsana investment, the Malaysian medical plant and the nuclear tube mill reopening need equipment, engineering, quality and commissioning partners.
Cost programme support
The SEK 200 million annual savings target opens room for procurement, energy-cost and process-efficiency offers, especially with European energy costs rising.
Kanthal growth in semiconductors and medical
Fast growth in electric heating for electronics and semiconductors and in medical wire calls for capacity, materials supply and regulatory and quality services.
Trade and supply-chain resilience
US tariffs, the Middle East conflict and the local-for-local strategy create demand for trade compliance, logistics and supply-chain risk tools.

Tamtam's reading of the priorities and challenges above, not the company's own words.

Selling to companies like Alleima?

Tamtam finds the companies that match your ideal customer, researches each account and tells you who to contact and when.

Find similar companies

Key documents

Read in full by Tamtam; each summary links to the document itself.

Questions about Alleima

What does Alleima do?

Alleima makes high value-added products in advanced stainless steels and special alloys, industrial heating products and ultra-fine medical wire, through three divisions: Tube, Kanthal and Strip.

What is Alleima's revenue?

Revenues were SEK 18,630 million in FY2025 (19,691), with adjusted EBIT of SEK 1,555 million. Nine-month 2026 revenues were SEK 13,729 million.

How many employees does Alleima have?

Alleima had a total workforce of about 6,800 in 2025, with 6,380 employees at year-end.

What is Alleima's strategy?

Alleima is shifting its mix toward prioritized segments such as Nuclear, Medical, Industrial Heating and Chemical and Petrochemical, aiming for 45-50% of revenues by 2030, while targeting an adjusted EBIT margin above 9% over a cycle.

Who leads Alleima?

Göran Björkman is President and CEO, Johan Eriksson is CFO, and Andreas Nordbrandt is Chairman.

Written by Tamtam from the company's own published documents listed above, read in full. Figures are as those documents state them, for the periods they name. (2026-11-17)