Tamtam Try Tamtam free
Arkema logo

Arkema account plan

Innovative, sustainable materials, solutions

At a glance

Arkema is a French Specialty Materials group (adhesives, advanced polymers, coatings) in 55 countries with 20,700 employees; 2025 sales €9,068 million.

Arkema is a French Specialty Materials group whose businesses create and strengthen materials, bond and assemble them, and protect and modify them, serving general industry, consumer goods and electronics, building, transportation and energy, and health. It operates in 55 countries with 154 sites and 17 R&D centers; 2025 sales split North America 34%, Europe 33%, Asia 28% and rest of the world 5%. In 2025 sales were €9,068 million (-5.0%), EBITDA fell 18.3% to €1,251 million (13.8% margin) and net income (Group share) was €63 million, with 20,700 employees. Thierry Le Hénaff is Chairman and CEO; Bpifrance Investissement and Fonds Stratégique de Participations sit on the Board.

Business units

Strategic priorities

2028 ambition
Under normalized conditions, about €12bn of sales and about 18% EBITDA margin by 2028, with net debt and hybrids below 2x EBITDA and ROCE of about 10% (5.4% in 2025).
Five key high-growth markets
Batteries and e-mobility, advanced electronics, sustainable goods, efficient buildings and health grew sales 16% in 2025, and more than 50% of R&D spend goes to them.
Specialty Materials focus
The new segmentation separates Specialty Materials (about 85% of sales) from Primary Materials; the CEO says there is "never any taboo" on disposals.
Cost savings and headcount
About €90 million of savings in 2025, the €250 million cumulative 2028 target expected two years early, and headcount down about 3% a year over the next three years.
Bolt-on acquisitions
Targeted in high-growth markets and fragmented adhesives, aiming for EV/EBITDA of about 7-8x four to five years after a deal.
Decarbonization
2030 targets include 60% of sales from ImpACT+ solutions (57% in 2025) and Scope 3 emissions -67% versus 2019.

Latest results

In H1 2026, the first half reported under the new segmentation, sales were €4,610 million (-3.5%, stable at constant currencies) and EBITDA €674 million (-2.7%) at a 14.6% margin; excluding a currency effect of about €30 million, EBITDA grew about 1%. Specialty Materials delivered €630 million of EBITDA (16.2% margin), led by Coating Solutions, while Advanced Materials' margin fell to 18.0%. Net income (Group share) was €92.9 million. Net debt and hybrid bonds rose to €3,605 million (2.9x LTM EBITDA) after the €3.60 dividend. Arkema confirmed its guidance of FY'26 EBITDA slightly higher than last year at constant currencies, with about €50 million of additional EBITDA from projects.

Investments and deals

PVDF expansions
Calvert City +15% started up on 23 June 2026 for energy storage, semiconductors and data centers; a further +20% at Changshu was announced in March 2026 for 2028.
Asian polymer capacity
Amino-11/PA11 in Singapore (€450 million, +50% amino-11 capacity) and Rilsan® Clear in Singapore, started in January 2026 and tripling capacity.
US projects
A 15 kt/year Forane® 1233zd unit at Calvert City and a DMDS expansion at Beaumont (+35%).
Carling acrylics site
A €130 million investment in new purification technology at the Carling acrylic monomer site in France, cutting CO2 by 20%.
Portfolio moves
Part of the impact modifiers and processing aids business was sold to Praana on 1 July 2026; Dow's laminating adhesives were acquired at end-2024. Capex is limited to about €600 million in 2026.

Challenges and risks

Weak demand in Europe and the US
Tariffs weighed on demand, construction shows no recovery and customers kept inventories tight; the CEO called 2025 one of the most difficult years in 20 years for the industry.
Middle East conflict
Since late February 2026 raw material increases have run from a few percent to 100%, energy and logistics costs rose, and Performance Additives lost Middle East sales and faced higher sulfur costs.
Acrylics cycle and legacy refrigerants
The low cycle in upstream acrylics and the decline of old-generation refrigerants explained most of the 2025 EBITDA drop.
Currency and Chinese overcapacity
FX cost about €40 million of EBITDA in 2025 and about €30 million in H1 2026; Chinese overcapacity is a named competitive risk.
Leverage
Net debt and hybrid bonds reached 2.9x LTM EBITDA at mid-2026, above the below-2x target.

What leadership says

“probably one of the most difficult our industry has faced in the last 20 years”

Thierry Le Hénaff, Chairman and CEO · Full-year 2025 results call, 26 February 2026

“this crisis will have a positive and negative impacts. But all in all, for Arkema, it should be around neutral.”

Thierry Le Hénaff, Chairman and CEO · On the Middle East conflict, Q1 2026 results call, 6 May 2026

“is an engine of growth and profitability for the company”

Thierry Le Hénaff, Chairman and CEO · On PVDF, Q1 2026 results call, 6 May 2026

“we made the choice not to reduce our innovation efforts”

Thierry Le Hénaff, Chairman and CEO · 2025 Universal Registration Document, March 2026

Where a supplier can help

Battery and electronics materials partnerships
Growth in batteries, electronics and 3D printing (about 15% in H1 2026) and the PVDF expansions suit partners in cell manufacturing, semiconductors and data-center supply chains.
Procurement and raw-material risk
Raw-material swings from a few percent to 100% after the Middle East conflict open doors for sourcing, commodity-risk and pricing-analytics providers.
Operational efficiency and digitalization
The cost-savings programme, a 3% annual headcount decline and the manufacturing excellence lever point to automation, maintenance and digital plant tools.
Decarbonization at sites
Projects such as Carling, biomethane supply and the 2030 Scope 3 target create demand for low-carbon energy, process technology and life-cycle assessment services.
Commercial excellence
The One Arkema key account model, the My.Arkema portal and the data center platform fit CRM, customer-portal and sales-enablement vendors.

Tamtam's reading of the priorities and challenges above, not the company's own words.

Selling to companies like Arkema?

Tamtam finds the companies that match your ideal customer, researches each account and tells you who to contact and when.

Find similar companies

Key documents

Read in full by Tamtam; each summary links to the document itself.

Questions about Arkema

What does Arkema do?

Arkema makes specialty materials: Bostik adhesives, advanced polymers such as PVDF and polyamides, performance additives and coating resins, plus acrylics and refrigerants in its Primary Materials segment, for industries from batteries to construction.

What is Arkema's revenue?

2025 sales were €9,068 million, down 5.0%, with EBITDA of €1,251 million. H1 2026 sales were €4,610 million.

How many employees does Arkema have?

20,700 employees in 2025, with headcount expected to decline by about 3% a year over the next three years.

What is Arkema's strategy?

To grow Specialty Materials in five high-growth markets through innovation, major capex ramp-ups and bolt-on acquisitions, targeting about €12bn of sales and about 18% EBITDA margin by 2028 under normalized conditions.

Who leads Arkema?

Thierry Le Hénaff is Chairman and CEO, Marie-José Donsion is CFO, and Laurent Tellier became COO on 1 July 2026.

Written by Tamtam from the company's own published documents listed above, read in full. Figures are as those documents state them, for the periods they name. (2026-11-17)