Tamtam Try Tamtam free
Cleveland-Cliffs logo

Cleveland-Cliffs account plan

Steel production and mining

At a glance

Cleveland-Cliffs is a vertically integrated North American steel producer focused on automotive sheet, with FY2025 revenues of $18,610 million.

Cleveland-Cliffs is a North America-based steel producer focused on value-added sheet products, particularly for the automotive industry. It is vertically integrated from iron ore mining, pellets and HBI through steelmaking to finishing, stamping, tooling and tubing, with primary facilities in Indiana, Michigan, Ohio, Pennsylvania and Ontario. Headquartered in Cleveland, Ohio, it employs about 25,000 people, about 90% in the U.S. In FY2025 it reported revenues of $18,610 million (2024: $19,185 million), a net loss of $1,428 million and Adjusted EBITDA of $37 million. Stelco, acquired on November 1, 2024, added low-cost flat-rolled capacity in Canada.

Business units

Strategic priorities

Automotive leadership and contract resets
Cliffs wants to bolster its automotive position; about 40-45% of flat-rolled shipments are now under fixed price contracts. The 2027 contracts reset on January 1, with minimum tonnage moving to take-or-pay and pricing moving to index, which management says should bring more than $1 billion of year-over-year EBITDA improvement.
Deleveraging
Debt paydown is the number one capital allocation priority. Management targets leverage below the 2x-2.5x range by mid-2027, using free cash flow and property sale proceeds, paying down the ABL first and then bonds, and says it will not issue stock.
Footprint optimization
Six idlings or closures in 2025 cut raw steel capability from about 23.0 to 20.0 million net tons. In 2026 Cliffs idled the Gary plate finishing line, one Burns Harbor plate mill and the Hamilton Works finishing operations, while aiming to raise throughput on underused U.S. coating assets.
Shift slab tons to higher-margin products
The AM USA slab contract, historically about 10% of sales volume, ended with final shipments in Q1 2026; the tons are moving to hot-rolled and other higher-margin products.
AI-driven operations
A multi-year partnership with Palantir, announced in Q2 2026, aims to improve real-time visibility of production, material flows and inventory, find bottlenecks faster and improve production planning.
Decarbonization targets
Targets vs 2023 of 30% lower Scope 1 and 2 GHG intensity and 20% lower material upstream Scope 3 intensity by 2035, and near net zero by 2050. Integrated-mill intensity fell from 1.82 to 1.64 tCO2e per ton of crude steel between 2020 and 2025.

Latest results

In Q3 2026 revenues were $5,612 million (Q3 2025: $4,734 million) and net income was $165 million against a loss of $234 million a year earlier. Adjusted EBITDA was $612 million vs $143 million, more than double Q2's $286 million and above the $575 million guide. Steelmaking revenue rose about 19% on higher pricing, volume and mix, with the average selling price at $1,177 per net ton vs $1,032. For the nine months, revenues were $15,760 million and the net loss narrowed to $198 million from $1,193 million. Management guided Q4 Adjusted EBITDA to $715 million and expects 2027 to be the best year since 2021.

Investments and deals

Middletown Works modernization
The DOE rescoped the previously awarded $500 million grant into a $1 billion project shared equally, covering blast furnace upgrades, advanced material handling, AI-enabled process control and a cogeneration plant, with completion expected in 2030.
Electrical steel expansion at Butler Works
A DOE-backed induction reheat furnace, completing in 2028, raises grain-oriented electrical steel output by 25% at that plant.
Capex plan
Capex was $561 million in FY2025. The Q3 2026 10-Q expects about $1.0 billion over the next 12 months including strategic projects; other projects include the Burns Harbor coke plant rebuild and a blast furnace stove rebuild at Stelco.
Stelco acquisition
Completed November 1, 2024 for C$3.4 billion. Stelco is now profitable on hot-rolled under Canada's tariff-rate quotas, but Cliffs idled the Hamilton galvanizing lines.
New automotive products
Galvanneal for exposed automotive parts on the Burns Harbor galvanizing line, with hot trials in early 2027, and electrogalvanized steel reintroduced to automakers for exposed parts.

Challenges and risks

Leverage and liquidity
Long-term debt was $7,645 million at September 30, 2026 with cash of $77 million; operating cash flow was $(462) million in FY2025 and ABL borrowings increased in 2026.
Dependence on trade protection
Results rely on 50% Section 232 tariffs and Canada's tariff-rate quotas; the 10-K lists the risk that these measures are removed or weakened.
Automotive demand and aluminum competition
Cliffs depends on automotive demand, and aluminum competes in light-weighting. Dearborn's blast furnace stays idle until automakers commit tonnage.
Environmental compliance
New NESHAP rules for taconite, iron and steel, coke and lime apply from 2027, alongside PM2.5, ozone and selenium requirements; environmental capex is estimated at about $71 million for 2026.
Labor negotiations
Negotiations with the USW to renew agreements across mining and steelmaking, covering over 18,000 employees, extended past the original deadline.

What leadership says

“the problem is no longer price. The problem is having access to steel.”

Lourenco Goncalves, Chairman and CEO · Cleveland-Cliffs Q3 2026 earnings call, 2026-10-19

“Section 232 has been the single most effective industrial policy implemented in our country in a generation.”

Lourenco Goncalves, Chairman and CEO · Cleveland-Cliffs Q2 2026 earnings call, 2026-07-23

“As an integrated mill operator, the secret sauce of unit cost performance is running the mills at full utilization.”

Celso Goncalves, President and CFO · Cleveland-Cliffs Q3 2026 earnings call, 2026-10-19

Where a supplier can help

Production planning and AI process control
The Palantir partnership and the AI-enabled process control at Middletown show appetite for tools that improve visibility of production, inventory and bottlenecks; complementary industrial software, sensors or integration services fit this priority.
Capital projects engineering and equipment
The Middletown modernization, Butler Works electrical steel expansion, Burns Harbor coke plant rebuild and a capex plan rising to about $1.0 billion create demand for engineering, construction, refractory and equipment suppliers.
Cost and maintenance efficiency
With the deleveraging priority and elevated repair and maintenance expense, suppliers that lower unit costs or maintenance outages at the blast furnaces can tie their offer to the full-utilization goal.
Environmental compliance solutions
The 2027 NESHAP compliance deadline and selenium, PM2.5 and ozone requirements open room for emissions control, water treatment and monitoring suppliers.
Automotive product development
Exposed-part galvanneal and electrogalvanized trials with automakers call for coating, testing and forming expertise that supports the automotive leadership priority.

Tamtam's reading of the priorities and challenges above, not the company's own words.

Selling to companies like Cleveland-Cliffs?

Tamtam finds the companies that match your ideal customer, researches each account and tells you who to contact and when.

Find similar companies

Key documents

Read in full by Tamtam; each summary links to the document itself.

Questions about Cleveland-Cliffs

What does Cleveland-Cliffs do?

Cleveland-Cliffs is a North America-based steel producer focused on value-added sheet for the automotive industry. It is vertically integrated from iron ore mining and HBI through steelmaking to tubing, stamping and tooling.

What was Cleveland-Cliffs' revenue?

FY2025 revenues were $18,610 million with a net loss of $1,428 million. In Q3 2026 revenues reached $5,612 million and the company returned to a quarterly net profit of $165 million.

How many people work at Cleveland-Cliffs?

About 25,000 people in the U.S. and Canada, about 90% in the U.S., with more than 18,000 covered by collective bargaining agreements.

Who leads Cleveland-Cliffs?

Lourenco Goncalves is Chairman and CEO. Celso Goncalves is President and CFO and joined the Board, which the CEO called the early stages of a leadership transition.

What is Cleveland-Cliffs' strategy?

Strengthen its automotive position, reset contracts toward take-or-pay and index pricing, optimize its footprint, pay down debt and invest in projects such as the Middletown Works modernization.

Written by Tamtam from the company's own published documents listed above, read in full. Figures are as those documents state them, for the periods they name. (2026-11-17)