Tamtam Try Tamtam free
GE Aerospace logo

GE Aerospace account plan

Jet engine manufacturer

At a glance

GE Aerospace makes and services commercial and military jet engines, with $45,855 million FY2025 revenue and approximately 57,000 employees.

GE Aerospace (legal name General Electric Company), headquartered in Evendale, Ohio, is the aerospace business GE kept after separating GE Vernova and GE HealthCare. It designs, manufactures and services jet engines and components for airlines, airframers such as Boeing and Airbus, and governments, with an installed base of approximately 50,000 commercial and 30,000 military engines; aftermarket services are approximately 70% of revenue. FY2025 total revenue was $45,855 million (up 18%), operating profit $9.1 billion (21.4% margin) and free cash flow $7.7 billion. It had approximately 57,000 employees, about 30,000 in the United States, and customers in approximately 120 countries. H. Lawrence Culp, Jr. is Chairman & CEO.

Business units

Strategic priorities

Fix supply to meet demand
Management says the constraint is supply, not demand: spare parts delinquency grew 20% sequentially in Q2 2026 while more than 95% of Q3 spare parts revenue was already in backlog.
Scale LEAP production and services
LEAP shop visits are expected to grow at about a 25% CAGR to 2030, with LEAP services margins in line with the total services portfolio by 2028; the certified LEAP-1B durability kit should roughly double time on wing.
FLIGHT DECK and AI in operations
The lean system and AI are used to cut lead times: F110 deliveries rose over 50% and supplier demand signals were cut in half with processing time down nearly 90% across 190 parts.
Defense growth and next-generation engines
The XA102 adaptive cycle engine moved to assembly and test, GEK1500 and GE426 reached preliminary design review milestones for Collaborative Combat Aircraft, and defense book-to-bill stayed above 2 in Q1 2026.
Future of flight technology
The CFM RISE programme (Open Fan, compact core, hybrid electric) and a megawatt-class hybrid electric demonstrator under NASA's EPFD continue, backed by roughly $3 billion of annual R&D.

Latest results

In Q2 2026 total revenue rose 21% to $13,349 million and adjusted EPS rose 22% to $2.02, with operating profit of $2.7 billion at a 21.7% margin, down 130 bp on install engine growth, investment and inflation. CES revenue grew 27% and DPT 16%; first half free cash flow was $4,685 million against $3,572 million. RPO reached $210,790 million at June 30, 2026. 2026 guidance was raised to high-teens revenue growth, operating profit of $10.55-10.75 billion, EPS of $7.65-7.85 and free cash flow of $8.9-9.2 billion.

Investments and deals

Acquisition of Consolidated Precision Products
Agreed on September 8, 2026 to buy the Cleveland castings maker (~6,600 employees, more than 20 facilities) for $11.75 billion, financed with $7 billion in cash and new debt; closing expected in the second half of 2027.
U.S. manufacturing
$1 billion invested and 5,000 U.S. workers hired in 2025, with the same planned for 2026, including nearly $200 million for LEAP durability upgrades.
MRO capacity
$1 billion to increase MRO capacity, including $500 million for LEAP MRO, plus $300 million at the Singapore repair facility.
Supplier tooling
$100 million for external suppliers' equipment and tooling to raise priority supplier material input.
Capital return
29.6 million shares repurchased for $7.4 billion in 2025 and dividends declared of $1.44 per share.

Challenges and risks

Supply chain and material availability
Material availability and supplier delivery performance still disrupt production, with sole- or limited-source suppliers a stated risk.
Margin dilution from new engines
Install engine growth, LEAP services and GE9X losses, which peak by 2028, weigh on margins; a GE9X mid-seal durability issue was found in January 2026.
Middle East conflict and air traffic
The full-year departures outlook was cut to flat to low single-digit growth; GE flags possible lower shop visits, spare parts volumes and customer credit effects, with no material impact in the first half of 2026.
Tariffs and trade policy
Tariffs affected long-term service agreement profitability in 2025; export controls, including rare earth restrictions, and sanctions remain risks.
Legacy insurance exposure
Run-off long-term care insurance carries GAAP reserves of $23,837 million, alongside Bank BPH litigation.

What leadership says

“it's much more a supply-side challenge than it is demand”

H. Lawrence Culp, Jr., Chairman & CEO · Q2 2026 GE Aerospace earnings call, 2026-07-16

“Investing in mission-critical casting capacity is needed to support the strong simultaneous demand across commercial engines, aftermarket and defense.”

H. Lawrence Culp, Jr., Chairman & CEO · Press release on the acquisition of Consolidated Precision Products, 2026-09-08

“Operationally, it is a number we are not proud of”

H. Lawrence Culp, Jr., Chairman & CEO · Q1 2026 GE Aerospace earnings call, 2026-04-21, on spare parts delinquency

“AI is a force multiplier for FLIGHT DECK”

H. Lawrence Culp, Jr., Chairman & CEO · Q2 2026 GE Aerospace earnings call, 2026-07-16

Where a supplier can help

Castings, forgings and critical parts
Tied to the supply chain challenge and the CPP acquisition: suppliers that add capacity for engine components can reduce the spare parts delinquency GE calls a supply-side problem.
MRO tooling and repair technology
Tied to the MRO capacity investments and the LEAP shop visit growth: repair processes, inspection equipment and tooling shorten turnaround times.
Industrial AI and supplier planning
Tied to the FLIGHT DECK and AI priority: tools that cut lead times or improve supplier demand signals extend what GE already reports.
U.S. manufacturing workforce
Tied to the plan to hire 5,000 U.S. workers in 2026: recruiting, training and onboarding services for factory and MRO sites.

Tamtam's reading of the priorities and challenges above, not the company's own words.

Selling to companies like GE Aerospace?

Tamtam finds the companies that match your ideal customer, researches each account and tells you who to contact and when.

Find similar companies

Key documents

Read in full by Tamtam; each summary links to the document itself.

Questions about GE Aerospace

What does GE Aerospace do?

GE Aerospace designs, manufactures and services commercial and military jet engines and components, including the LEAP through CFM International, with aftermarket services approximately 70% of revenue.

What is GE Aerospace's revenue?

FY2025 total revenue was $45,855 million, up 18%. First half 2026 revenue was $25,741 million, up 23%.

How many employees does GE Aerospace have?

Approximately 57,000 at December 31, 2025, of whom approximately 30,000 in the United States.

Who leads GE Aerospace?

H. Lawrence Culp, Jr. is Chairman & CEO and Rahul Ghai is SVP & CFO; Mohamed Ali leads Commercial Engines & Services and Amy Gowder leads Defense & Systems.

Why is GE Aerospace buying CPP?

To secure castings capacity for commercial engines, aftermarket and defense; the $11.75 billion deal for Consolidated Precision Products is expected to close in the second half of 2027.

Written by Tamtam from the company's own published documents listed above, read in full. Figures are as those documents state them, for the periods they name. (2026-11-17)