Tamtam Try Tamtam free
Greif logo

Greif account plan

Industrial packaging products manufacture

At a glance

Greif makes steel, fibre and plastic drums, IBCs, jerrycans, closures and recycled paperboard in over 35 countries; fiscal 2026 net sales $4,376.8 million.

Greif is an industrial packaging producer operating in over 35 countries, selling steel, fibre and plastic drums, rigid intermediate bulk containers (IBCs), jerrycans and small plastics, closure systems, recycled paperboard, tubes and cores to chemicals, lubricants, paints, food and beverage, petroleum, agriculture and pharmaceutical customers. It is headquartered in Delaware, Ohio, its Class A and Class B shares are listed on the NYSE (GEF, GEF.B), and it had approximately 12,000 full-time employees at September 30, 2025. After selling its Containerboard Business for $1,804.7 million (August 31, 2025) and its Soterra timberland for about $462.0 million (October 1, 2025), fiscal 2026 (twelve months to September 30, 2026) net sales were $4,376.8 million and Adjusted EBITDA $625.7 million, up 11.7%. About 48% of fiscal 2025 sales came from non-U.S. operations.

Business units

Strategic priorities

Structural cost optimization
$105 million of run-rate savings were reached by the end of fiscal 2026, a year ahead of the original $100 million commitment; the target is raised to $150 million by end of fiscal 2027 through operating efficiency, network simplification and overhead reduction.
Commercial transformation and new logos
A new commercial structure, pay for results and solution selling aim to turn salespeople from "farmers into hunters"; more than 4,000 new logos were won in fiscal 2026, with the Greif+ self-service tool freeing sales time.
Growth in polymers and closures
Organic growth investment goes mainly to polymers and closures, with fiscal 2027 capex guided at $185 million (from $160 million); target end markets include flavor and fragrance and pharma.
Portfolio focus
Greif sold Containerboard and Soterra and is exiting Coated Recycled Board to focus on businesses with leading market positions; in metals the focus is optimization.
Tuck-in acquisitions with low leverage
Several tuck-ins a year such as Envaplast, no transformative M&A, and leverage kept below 2.0x, with below 1.5x seen as realistic near term.

Latest results

In fiscal 2026 (twelve months to September 30, 2026) net sales were $4,376.8 million against $4,315.3 million, Adjusted EBITDA rose 11.7% to $625.7 million and net income excluding adjustments rose 73.3% to $231.9 million ($4.04 per Class A share). Q4 net sales were $1,143.6 million while Adjusted EBITDA fell 3.1% to $163.0 million, with $18.2 million of the gap from prior-year incentive accrual timing. Adjusted free cash flow of $279.3 million came in below guidance because Greif held higher, costlier resin inventories during the Middle East disruption. Leverage fell to 1.2x from 1.7x. For fiscal 2027 management gives only low-end guidance of $645 million Adjusted EBITDA and $290 million adjusted free cash flow, assuming no demand inflection.

Investments and deals

Containerboard and Soterra divestitures
Containerboard Business sold for $1,804.7 million effective August 31, 2025 and Soterra timberland (about 173,000 acres) for approximately $462.0 million on October 1, 2025; proceeds went to debt repayment.
Envaplast acquisition
A Spanish small polymer container producer mostly serving agrochemicals, acquired in 2026 as a foothold for EMEA growth.
Capex in polymers and closures
Fiscal 2026 capex was $172.8 million; fiscal 2027 capex guidance is $185 million, with maintenance around $85 million and the balance mainly for growth in polymers and closures.
Sweetwater mill closure
Closure of the Sweetwater paperboard mill in Austell, GA removes 120,000 tons, 60% of it Coated Recycled Board, with $36.5 million of Q4 impairment charges mainly from the closure.
Share repurchases
$225.2 million of shares were repurchased in fiscal 2026, about 6% of shares outstanding, under authorizations including $300.0 million approved December 9, 2025.

Challenges and risks

Prolonged industrial contraction
Management sees a multi-year period of industrial contraction with no compelling demand inflection; Q4 2026 volumes fell about 2.3% in polymers and metals and 3.5% in closures.
Raw material and Middle East disruption
Middle East conflicts raised raw material, energy and transportation costs; resin price swings forced near-daily price increases in polymers and tied up cash in inventory.
Destocking and weak end markets
Small containers faced destocking and weak agricultural demand in Q4; the CFO said outside data-center-linked business "everything else is off", with Europe a little worse.
Customer consolidation and pricing pressure
Customer and supplier consolidation intensifies pricing pressure in highly competitive markets, and about 48% of sales come from non-U.S. operations exposed to currency and tariffs.
Regulation and acquisition risk
PFAS and climate regulation, a 2030 greenhouse gas reduction target that may not be achieved, and thin goodwill headroom in Small Plastics & Jerrycans after recent acquisitions.

What leadership says

“We are not depending on an industrial recovery to improve Greif.”

Ole Rosgaard, President and CEO · Fourth quarter 2026 earnings call, November 2026

“Two years ago, we set out to build a simpler, stronger, more profitable Greif.”

Ole Rosgaard, President and CEO · Fourth quarter 2026 earnings call, November 2026

“There's plenty of Envaplasts out there, and we know where they are”

Ole Rosgaard, President and CEO · On tuck-in acquisitions, fiscal third quarter 2026 earnings call, July 29, 2026

“a working capital timing impact rather than a structural change”

Larry Hilsheimer, EVP and CFO · On fiscal 2026 free cash flow, fourth quarter 2026 earnings call

Where a supplier can help

Resin and raw material sourcing
Tied to the raw material and Middle East disruption challenge: supply, hedging and procurement analytics partners that stabilize resin and steel input costs and reduce safety stock.
Manufacturing efficiency and network simplification
Tied to the $150 million cost optimization priority: automation, energy efficiency and plant analytics for a network of over 35 countries.
Sales enablement for new logos
Tied to the commercial transformation priority: prospecting data, CRM and solution-selling tools for a sales force moving from farming to hunting, and support for the Greif+ self-service tool.
Equipment for polymer and closure growth
Tied to the capex in polymers and closures: moulding equipment, tooling and capacity projects within the $185 million fiscal 2027 capex budget.
Acquisition integration
Tied to the tuck-in acquisition priority: integration services and systems for acquired small polymer container makers such as Envaplast.

Tamtam's reading of the priorities and challenges above, not the company's own words.

Selling to companies like Greif?

Tamtam finds the companies that match your ideal customer, researches each account and tells you who to contact and when.

Find similar companies

Key documents

Read in full by Tamtam; each summary links to the document itself.

Questions about Greif

What does Greif do?

Greif produces industrial packaging: steel, fibre and plastic drums, IBCs, jerrycans and small plastics, closure systems, recycled paperboard, tubes and cores, sold to industrial customers in over 35 countries.

What is Greif's revenue?

Fiscal 2026 (twelve months to September 30, 2026) net sales were $4,376.8 million and Adjusted EBITDA $625.7 million, up 11.7%.

How many employees does Greif have?

Approximately 12,000 full-time employees at September 30, 2025, about half in North America.

What is Greif's strategy?

Raise structural cost savings to $150 million by end of fiscal 2027, win new customers through a reworked sales model, invest in polymers and closures, and make tuck-in acquisitions while keeping leverage below 2.0x.

Who leads Greif?

Ole Rosgaard is President and CEO and Larry Hilsheimer is EVP and CFO.

Written by Tamtam from the company's own published documents listed above, read in full. Figures are as those documents state them, for the periods they name. (2026-11-17)