Tamtam Try Tamtam free
Kaiser Aluminum logo

Kaiser Aluminum account plan

Semi-fabricated aluminum mill products

At a glance

Kaiser Aluminum makes specialty aluminum plate, sheet, coil and extrusions for aerospace, packaging, industry and autos; FY2025 net sales $3.37 billion.

Kaiser Aluminum Corporation manufactures semi-fabricated specialty aluminum mill products (flat-rolled plate, sheet and coil, extruded and drawn rod, bar, tube and shapes) for aerospace, packaging, general engineering and automotive customers. It produces in the United States plus one plant in London, Ontario, with major sites at Trentwood (heat treat plate) and Warrick (packaging coil). In FY2025 Net sales were $3,373.0 million (up 12%), Conversion Revenue $1.45 billion, Net income $112.5 million and Adjusted EBITDA $310.2 million. It had 3,840 employees at December 31, 2025, about 65% union-represented, and reports one operating segment. Fred Stephan became CEO on November 1, 2026, succeeding Keith Harvey, who becomes Executive Chair.

Business units

Strategic priorities

Harvest returns from growth investments
With the Warrick fourth coating line and Trentwood Phase VII behind it, management says 2026 marks a shift toward harvesting returns through margin expansion and lower manufacturing and operating costs.
Packaging mix shift to coated products
Roll Coat 4 is fully commissioned, coated mix is about 75% and growing, about 80% utilization is planned in 2026, and the final multi-year contract for the new capacity was signed.
Aerospace and defense recovery
Plate returns after the Phase VII install; management cites a 12-year backlog in large commercial jets, extended JSF F-35 work, and contracts being reset.
Automotive driveshaft capacity
Kaiser is retooling Bellwood for light truck and SUV specialty products where it has close to 100% supply position, with a duplicate driveshaft line planned in 2027 without an outage.
Ramp to meet demand
Bookings are moving into 2027 with extended lead times; plans to manage growth will be presented by new CEO Fred Stephan in February 2027.

Latest results

In Q3 2026 Net sales rose 44% to $1,214.5 million and Conversion Revenue to $439.1 million from $350.7 million, on 11% higher shipments (300.2 million lbs) and higher prices. Net income was $31.0 million ($1.84 per diluted share) versus $39.5 million, and Adjusted EBITDA $84.0 million versus $81.3 million, despite unfavorable metal price lag, the Bellwood outage and coating line start-up costs. Over nine months, Net income was $190.3 million and Adjusted EBITDA $378.8 million (from $222.4 million). For 2026 Kaiser expects Conversion Revenue growth toward the high end of 10% to 15% and Adjusted EBITDA growth of 45% to 55%, toward the lower end; free cash flow is now seen above $200 million.

Investments and deals

Warrick fourth coating line
Added higher-margin coated packaging capacity; its delayed ramp-up reduced 2025 shipments, and start-up costs continued in Q3 2026.
Trentwood modernization and Phase VII
Lowers conversion costs and adds thin gauge plate capacity; the planned outage hit 2025 shipments, and the added capacity lifted Q3 2026 Aero/HS shipments.
Capital spending
Capex was $136.9 million in 2025 and is now expected at about $130.0 million in 2026, focused on capacity expansion, sustaining operations, quality and efficiency.
Refinancing
$500.0 million of 5.875% Senior Notes due 2034 replaced the 4.625% notes due 2028, and the revolving credit facility was extended to October 2030.

Challenges and risks

Metal price and scrap exposure
Sequential Q3 2026 EBITDA fell about $54 million from scrap spreads, scrap utilization and metal unit costs, and $28 million from metal price lag.
Execution of outages and ramp-ups
Planned outages at Bellwood and furnaces, and Roll Coat 4 start-up, weighed on 2026 results; on the Bellwood restart Harvey said "We didn't handle that extremely well."
Customer concentration
One customer was 16% and a second 15% of 2025 Net sales, and Packaging customers are trimming year-end inventories.
Dependence on Alcoa and labor
Kaiser relies on Alcoa for resources essential to Warrick operations, and about 65% of employees are union-represented, with several contracts due to expire in 2026.
Trade and aerospace cyclicality
Risks include tariffs, sanctions, foreign competitors with cost advantages, aerospace destocking and defense spending shifts.

What leadership says

“I haven't seen demand this strong in any of my 46 years”

Keith Harvey, Chairman, President and Chief Executive Officer · Q3 2026 earnings call, October 22, 2026

“The biggest challenge for our company is how well we can ramp.”

Keith Harvey, Chairman, President and Chief Executive Officer · Q3 2026 earnings call, October 22, 2026

“With our two major growth investments now behind us, 2026 will mark a shift toward harvesting returns through margin expansion”

Keith Harvey, Chairman, President and Chief Executive Officer · Q4 and full-year 2025 earnings call, February 2026

“our strategy is sound, our markets are strong, and our execution plans are in place.”

Fred Stephan, incoming President and Chief Executive Officer · Q3 2026 earnings call, October 22, 2026

Where a supplier can help

Capacity ramp support
Tied to the ramp-to-meet-demand priority: equipment, automation and engineering suppliers could help add throughput across Trentwood, Warrick and Bellwood ahead of the February 2027 growth plan.
Maintenance and outage execution
Tied to the execution challenge: maintenance contractors, project management and reliability tools could reduce the cost of planned outages and start-ups such as Bellwood and Roll Coat 4.
Scrap sourcing and metal analytics
Tied to metal price and scrap exposure: scrap suppliers, sorting technology and metal cost analytics could improve scrap utilization.
Cost reduction programs
Tied to the shift toward harvesting returns through margin expansion: energy, procurement and operational excellence partners fit the stated focus on lower manufacturing and operating costs.

Tamtam's reading of the priorities and challenges above, not the company's own words.

Selling to companies like Kaiser Aluminum?

Tamtam finds the companies that match your ideal customer, researches each account and tells you who to contact and when.

Find similar companies

Key documents

Read in full by Tamtam; each summary links to the document itself.

Questions about Kaiser Aluminum

What does Kaiser Aluminum do?

Kaiser Aluminum makes semi-fabricated specialty aluminum mill products, including plate, sheet, coil, extrusions and drawn products. It serves aerospace and defense, beverage and food packaging, general engineering and automotive customers.

What is Kaiser Aluminum's revenue?

FY2025 Net sales were $3,373.0 million, up 12%, with Conversion Revenue of $1.45 billion. Nine-month 2026 Net sales were $3,577.9 million.

How many employees does Kaiser Aluminum have?

Kaiser had 3,840 employees at December 31, 2025 and about 3,800 at September 30, 2026, about 65% union-represented.

Who leads Kaiser Aluminum?

Fred Stephan became President and CEO on November 1, 2026. Keith Harvey, CEO before him, becomes Executive Chair and adviser; Neal West is EVP and CFO.

Written by Tamtam from the company's own published documents listed above, read in full. Figures are as those documents state them, for the periods they name. (2026-11-17)