Tamtam Try Tamtam free
Nippon Steel Corporation logo

Nippon Steel Corporation account plan

Global steel manufacturing and sales

At a glance

Nippon Steel is Japan's top steelmaker and owner of U. S. Steel, with ¥10,063.2 billion of revenue in FY2025 and 86 million t/year of crude capacity.

Nippon Steel Corporation is Japan's top steelmaker, holding roughly half of the domestic market, and was world No. 4 in crude steel production in 2024. It runs as an operating holding company covering domestic steel, overseas steel (U. S. Steel, AM/NS India, Thailand, Slovakia), raw materials, steel group companies and three non-steel companies in engineering, chemicals & materials and system solutions. Its high-grade products (automotive sheet, electrical steel, construction steel) go mostly to manufacturing and construction customers. In FY2025 (year to March 2026) revenue was ¥10,063.2 billion and underlying business profit ¥650.4 billion; the group counted 530 companies and 113,845 employees at March 31, 2025. U. S. Steel became a wholly owned subsidiary on June 18, 2025.

Business units

Strategic priorities

2030 plan profit target
Underlying business profit of ¥1 trillion or more per year by fiscal 2030 (domestic ¥500.0 bn or more, overseas ¥500.0 bn or more), ROE approximately 10%, D/E approximately 0.7 and global crude capacity of 100 million tons or more.
Turning around U. S. Steel
$3.0 bn of EBITDA improvement by around FY2035 ($0.5 bn of operational synergies, $2.5 bn from capital investments), with about US$11 billion of investment in the U.S. by the end of 2028; the FY2026 synergy target was raised from $200 million to $300 million.
Domestic cost competitiveness and high-grade mix
Centralised production by product line, the Nagoya next-generation hot strip mill (approx. 6MT/Y, approx. ¥270.0 bn) for automotive sheet, electrical steel capacity, and solutions such as NSafe-AutoConcept and ProStruct.
Growth in India and Thailand
AM/NS India's Hazira expansion from approx. 9 to 15 Mt/Y and a 7.0 MT/year works in Rajayyapeta, Andhra Pradesh; in Thailand, raising a ~30% sheet market share toward a 50% target.
Carbon neutrality by 2050
Large-scale EAFs at Yawata, Hirohata and Shunan toward 2030, hydrogen ironmaking technology by 2040, and institutionalisation of a GX Steel market; approximately 500 billion yen of R&D and 4 to 5 trillion yen of capex expected by 2050.

Latest results

In Q1 FY2026 (April-June 2026) revenue was ¥2,821.1 billion, underlying business profit ¥108.4 billion and profit attributable to owners ¥75.2 billion; the Middle East situation cost approx. ¥25.0 bn in the quarter. The domestic steel business posted a (12.4) billion yen loss while U. S. Steel contributed 32.2. The FY2026 forecast keeps underlying business profit at ¥700.0 billion or more (H2 annualised ¥900.0 billion or more), raises profit to ¥290.0 billion (+70.0) and revenue to ¥11,200.0 billion, with U. S. Steel lifted to ¥180 billion or more and the domestic steel business cut to ¥120.0 bn. FY2025 had ended with profit of only ¥17.1 billion after ¥271.2 billion of additional line items, chiefly the transfer of the AM/NS Calvert stake.

Investments and deals

U. S. Steel acquisition and capex
Merger consideration of about US$14.2 billion (approx. ¥2 trillion), plus about US$11 billion of new investment by 2028; approved projects reached approx. $3.7 bn, including a $1.88 bn DRI plant at Big River and a $0.475 bn quench and tempering line at Fairfield.
2030 plan investment envelope
Approx. ¥6 tn of capital and business investment over FY2026-2030.
Domestic mills
Nagoya next-generation hot strip mill (approx. ¥270.0 bn, commercial operation scheduled for August 2026) and ¥213 billion for electrical steel capacity and quality.
Raw materials stakes
EVR JV in Canada (approx. ¥200 billion), Blackwater in Australia (approx. ¥108 billion) and the Kami iron ore project for DR-grade ore.
Group reorganisation and asset sales
Sanyo Special Steel to be merged on April 1, 2027, Nippon Steel Slovakia held directly from October 1, 2026, and asset sales of ¥100.0 bn or more planned for FY2026.

Challenges and risks

Middle East conflict costs
The conflict was not envisioned in the FY2026 plan; it raised energy, freight and raw material costs and cut exports to the region, and its full-year effect cannot be quantified.
Chinese oversupply and weak Japanese demand
China's surplus exports (110 million tons in 2024) and a structural decline in Japanese demand weigh on spreads; domestic HRC raw-material margins tightened by ¥20,000 over FY2025.
High-cost U. S. Steel integrated mills
U. S. Steel posted a ¥5.6 billion underlying loss for its first nine months (Clairton coke incident, a pellet contract repudiation, winter storm), and its blast furnace operations carry high variable costs that will take several years to fix.
Debt and cash flow
FY2025 free cash flow was negative by more than ¥2 trillion and interest-bearing debt rose by around ¥2.6 trillion; the FY2026 interest burden is approximately ¥100.0 billion and free cash flow stays negative on front-loaded capex.
Cost of decarbonisation
Decarbonisation investment depends on a GX Steel market passing on the CO2 reduction value and on government support; USSK must also absorb EU-ETS costs.

What leadership says

“a historically unprecedented and extremely challenging business environment”

Tadashi Imai, Representative Director, President and COO · Nippon Steel Integrated Report 2025

“a critical turning point in our journey to reclaim our position as the world's leading steelmaker”

Takahiro Mori, Vice Chairman, Executive Vice President of Finance · Nippon Steel Integrated Report 2025, on the U. S. Steel merger

Where a supplier can help

Operational improvement at U. S. Steel
The synergy programme (260 improvement initiatives on blast furnaces, steelmaking yield and hot rolling) and the high variable costs of the integrated mills create demand for process optimisation, quality and maintenance expertise.
Large capex projects
The approx. ¥6 tn investment plan, the Big River DRI plant, Gary relining and hot strip mill upgrades, and the Nagoya mill open opportunities for equipment, engineering and construction suppliers.
Decarbonisation technology
EAF conversion at Yawata, hydrogen ironmaking trials and CCS work tie to the carbon-neutrality priority and suit suppliers of electrification, hydrogen and emissions-tracking solutions.
Cost reduction under margin pressure
With domestic margins squeezed by raw material and Middle East costs, suppliers that lower energy, logistics or procurement costs address a stated challenge.
AI and data centre demand
The non-steel segments target growth from AI and semiconductor materials and modular data centres, an angle for partners in semiconductor supply chains and data-centre infrastructure.

Tamtam's reading of the priorities and challenges above, not the company's own words.

Selling to companies like Nippon Steel Corporation?

Tamtam finds the companies that match your ideal customer, researches each account and tells you who to contact and when.

Find similar companies

Key documents

Read in full by Tamtam; each summary links to the document itself.

Questions about Nippon Steel Corporation

What does Nippon Steel do?

Nippon Steel makes high-grade steel such as automotive sheet, electrical steel and construction steel in Japan and abroad, and also runs raw material, engineering, chemicals and IT businesses.

What is Nippon Steel's revenue?

Revenue was ¥10,063.2 billion in FY2025 (year to March 2026), with underlying business profit of ¥650.4 billion; the FY2026 forecast is ¥11,200.0 billion.

How many employees does Nippon Steel have?

The group had 113,845 employees across 530 companies at March 31, 2025.

Does Nippon Steel own U. S. Steel?

Yes. U. S. Steel became a wholly owned subsidiary on June 18, 2025, for about US$14.2 billion, with about US$11 billion of new investment committed by 2028.

What is Nippon Steel's strategy?

The 2030 Medium- to Long-term Management Plan targets underlying business profit of ¥1 trillion or more per year and 100 million tons or more of global crude capacity, through domestic cost competitiveness and growth in the U.S., Europe, India and Thailand.

Written by Tamtam from the company's own published documents listed above, read in full. Figures are as those documents state them, for the periods they name. (2026-11-17)