Tamtam Try Tamtam free
RHI Magnesita logo

RHI Magnesita account plan

Refractory product supplier

At a glance

RHI Magnesita supplies refractory products, systems and services to steel and industrial customers, with FY2025 revenue of €3,366m and about 15,500 employees.

RHI Magnesita makes and services refractories, the heat-resistant linings used by steel, cement, non-ferrous metals, glass and chemicals producers. It runs raw material sites in Austria, Brazil, China, Czechia, Türkiye and the US and 76 refractory production plants, and sells a full-service model called 4PRO that bundles refractories, robotics, sensors, on-site service and decarbonisation. FY2025 revenue was €3,366m (-1% at constant currency) with Adjusted EBITA of €373m (margin 11.1%) and reported profit after tax of €94m. The Group employs approximately 15,500 people plus around 5,500 contractors. Gustavo Franco became CEO on 1 November 2026, succeeding Stefan Borgas; Herbert Cordt is Chair.

Business units

Strategic priorities

2035 Strategy
Three pillars approved by the Board: Portfolio enhancement (including consolidation M&A), Performance excellence (network optimisation, SG&A cuts, digital transformation) and Planet engagement (recycling, decarbonisation, circularity).
4PRO full-service growth
4PRO represents "more than 30%" of revenues; four new Green Steel contracts were won in 2025 and the model was extended into Industrial segments.
Self-help and cost reduction
€45m of 2026 self-help (€15m each from price adaptations, network optimisation and admin savings); Global shared services with Capgemini on track for up to €20m of EBITA annually by 2029.
Digital transformation
An approximately €100 million digital infrastructure programme (SAP S/4HANA, transport management, o9 supply chain planning), around two-thirds complete in mid-2026.
Deleveraging
Leverage of 2.9x targeted around 2.6x and net debt about €1,400m by year-end 2026, toward a 1.0-2.0x target range.
Circularity
Recycling rate raised to 19.5% in H1 2026 through MIRECO in Europe, BPI in North America and the Khemka joint venture in India.

Latest results

In H1 2026 revenue was €1,595m, down 5% reported and flat at constant currency after an €82m FX headwind. Adjusted EBITA rose 17% to €165m (+42% at constant currency), lifting the margin to 10.3% from 8.4%, and adjusted EPS rose 32% to €1.81. Steel drove the improvement while Industrial revenue fell 13% and more than €50m of Industrial Projects revenue was deferred past year end. The Middle East war added €28m of unplanned costs. FY2026 Adjusted EBITA guidance of €400m, including a €35m FX headwind, was confirmed, and capex was cut from €130m to €115m.

Investments and deals

Resco acquisition
Completed in January 2025, adding Foundry, Process Industries and Petrochemicals competencies; Resco and BPI added €195m of revenue in North America in 2025.
Recycling joint ventures
A BPI recycling joint venture in the US (June 2025) and a 51% joint venture with Khemka Refractories in Odisha, India, expected to close in Q3 2026.
Green Minerals Initiative
With MCi Carbon, a CCU plant absorbing 50kt/year of CO2, supported by a €30m Austrian government grant for the Hochfilzen plant.
Network optimisation
€100m invested 2021-2025, with closure of the Mainzlar and Wetro plants and a further €15m of EBITA expected in 2026.
Refinancing
A new €350m OeKB-backed loan maturing April 2031 and €450m of Schuldscheindarlehen issued in July 2026.

Challenges and risks

Weak industrial projects
Industrial project numbers remain around 40% below historic averages, and Glass revenue fell a further 40% at constant currency in H1 2026.
Chinese competition
Chinese steel and refractory exports pressure prices, particularly in the Middle East, Africa and Latin America.
Middle East war costs
€28m of unplanned cost increases in H1 2026, including about €10m in raw materials and €11m in transport.
Tariffs
US tariffs of 15% on European products and a potential 50% on Brazilian imports affect regional supply flows.
Executing transformation
"Inability to execute key strategic initiatives" was raised as a risk as the digital transformation entered roll-out; the US ERP go-live created temporary backlogs.

What leadership says

“4PRO is a strategic differentiator in a volatile and uncertain market environment”

Stefan Borgas, CEO until November 2026 · Annual Report and Accounts 2025, March 2026

“Our steel business is on a positive trajectory, particularly in North America, Europe and India”

Stefan Borgas, CEO until November 2026 · 2026 Half Year Results, July 2026

“we do not see refractories as commodities, but rather as enablers of value creation”

Gustavo Franco, CEO · Refwin interview at the CEO handover, October 2026

“The objective is not to replace people, but to augment human expertise.”

Gustavo Franco, CEO · Refwin interview at the CEO handover, October 2026

Where a supplier can help

Supply chain and ERP roll-out support
Tied to the digital transformation priority and the execution challenge: S/4HANA, transport management and planning roll-outs need integration, data and change support, as the US go-live backlogs show.
Logistics and raw material sourcing
Tied to the Middle East war costs challenge: freight and raw material cost spikes make transport optimisation and dual sourcing relevant.
Robotics, sensors and AI for 4PRO
Tied to the 4PRO growth priority: partners in robotics, sensors and operational AI can extend the full-service offer sold to steel and industrial customers.
Recycling and decarbonisation technology
Tied to the circularity priority and the Green Minerals Initiative: sorting, processing and carbon capture technologies feed the recycling and CCU programmes.
Shared services and cost programmes
Tied to the self-help priority: admin cost savings and the Global shared services programme open room for process automation suppliers.

Tamtam's reading of the priorities and challenges above, not the company's own words.

Selling to companies like RHI Magnesita?

Tamtam finds the companies that match your ideal customer, researches each account and tells you who to contact and when.

Find similar companies

Key documents

Read in full by Tamtam; each summary links to the document itself.

Questions about RHI Magnesita

What does RHI Magnesita do?

It produces refractory products, systems and services that line the furnaces and vessels of steel, cement, non-ferrous metals, glass and chemicals producers, from its own raw material sites through 76 refractory production plants.

What is RHI Magnesita's revenue?

FY2025 revenue was €3,366m with Adjusted EBITA of €373m; H1 2026 revenue was €1,595m.

How many employees does RHI Magnesita have?

Approximately 15,500 employees, plus around 5,500 contractors.

Who leads RHI Magnesita?

Gustavo Franco became CEO on 1 November 2026, succeeding Stefan Borgas; Herbert Cordt is Chair and Ian Botha is CFO.

What is RHI Magnesita's strategy?

The 2035 Strategy rests on Portfolio enhancement, Performance excellence and Planet engagement, with the 4PRO full-service model, digital transformation and recycling as main levers.

Written by Tamtam from the company's own published documents listed above, read in full. Figures are as those documents state them, for the periods they name. (2026-11-17)