Tamtam Try Tamtam free
Ryerson logo

Ryerson account plan

Metal processing and distribution

At a glance

Ryerson is a North American value-add processor and distributor of industrial metals, with $4,571.3 million of FY2025 net sales before the Olympic Steel merger.

Ryerson Holding Corporation, based in Chicago, buys stainless steel, aluminum, carbon steel and alloy steels in bulk from primary producers and sells them processed (laser cutting, sawing, slitting, machining, welding) in smaller quantities with short lead times. At the end of 2025 it had approximately 4,300 employees across 103 facilities in North America and three facilities in China, about 40,000 customers and approximately 75,000 products; nearly 80% of what it sells is processed to customer requirements. FY2025 net sales were $4,571.3 million (down 0.6%) with a net loss attributable to Ryerson of $56.4 million. On February 13, 2026 it completed its all-stock merger with Olympic Steel, becoming North America's second largest metals service center, and its ticker changed from RYI to RYZ. Platinum Equity affiliates owned approximately 12.2% of the shares at year-end 2025.

Business units

Strategic priorities

Olympic Steel merger synergies
Ryerson targets approximately $120 million in annual synergies by the beginning of 2028, from procurement scale, efficiency gains, commercial enhancement and network optimization. About $13 million was realized in Q3 2026, and Q4 is guided to $14-15 million ($56-60 million annualized).
Deleveraging and free cash flow
Leverage was 3.2x in Q3 2026 and is expected below 3.0x by year-end 2026; free cash flow and debt reduction come first, with M&A held to "a high strategic and financial bar."
Transactional, value-added growth
The investment cycle aimed to grow transactional market share at a lower cost to serve and move into higher value-added products. Year to date in 2026, transactional business is growing double digits, and contract volumes are being steered to Olympic facilities to free Ryerson capacity.
Margin expansion
The margin gap between a transactional pound and a program pound has widened to about 1,000 basis points. Lehner's cycle map runs from 2% to 5% EBITDA at the bottom to 8% to 10% at the top, against a pro forma margin of about 6%.
Procurement as one buyer
Combined purchasing grows to 2.9 to three million tons, and the merged company negotiates 2027 contracts with the mills as one voice, since metal is between 70 and 95% of costs.
Growth in data center and power end markets
Data center and power generation projects were an estimated 9% of revenues in Q3 2026, against 6% in Q2, reached through OEMs and subcontractors in power, IT hardware, cooling and fabrication.

Latest results

In Q3 2026 net sales were $2,177.8 million against $1,161.5 million in Q3 2025, on 814 thousand tons; same-store net sales (excluding Olympic Steel) were $1,575 million, with same-store tons up 14.2% and the same-store average selling price up 18.7% to $2,844 per ton. Gross margin held at 17.2%, LIFO expense rose to $30.0 million, and operating profit was $51.5 million against a $1.0 million loss. Over the first nine months revenue was $5.8 billion (up 66%) and net income attributable to Ryerson was $52.0 million, against an $18.5 million loss; North American same-store volumes rose 8.8% against 5.0% for the industry. Operating cash flow was -$176.0 million over nine months on a working-capital build, and total debt rose to $1,006.1 million. For Q4 2026 Ryerson guides shipments down 6% to 8%, revenue of $1.96-2.04 billion and adjusted EBITDA excluding LIFO of $100-104 million.

Investments and deals

Olympic Steel merger
All-stock merger closed on February 13, 2026, at 1.7105 Ryerson shares per Olympic share; the fair value of the purchase consideration was $837.3 million, including $270.0 million net of cash acquired to extinguish Olympic Steel's debt.
2026 capital expenditure
Full-year 2026 capex is expected at approximately $75 million ($50 million legacy Ryerson, $25 million Olympic Steel), after $51.5 million in 2025, $99.6 million in 2024 and $121.9 million in 2023.
Network consolidation
Mexico is already consolidated; Olympic Milford and Ryerson Specialty Alloys in Connecticut combine in Q1 2027, the Tulsa sites will share equipment, and further projects are planned in Cleveland, Minneapolis and outside Atlanta.
Systems integration
Approximately 90% of Olympic Steel's inventory and transaction data is already in Ryerson's information system, so inventory can be shared across the network; Ryerson.com 3.0 and Ryerson's digital investments were to be rolled out at scale.
Larger credit facility
The credit facility was extended to February 13, 2031 and raised from $1.3 billion to $1.8 billion; part of the proceeds repaid Olympic Steel's loan agreement.

Challenges and risks

Metals price volatility
Price swings affect margins and liquidity; carbon mill price increases pushed Q3 2026 LIFO expense to $30.0 million, and program contracts that reset quarterly lag rising carbon costs.
Tight supply
Hot roll is expected to be very tight through the first half of 2027 and aluminum also tight; the Iran conflict disrupts shipping, fuel, freight and insurance.
Tariffs and trade
Section 232 tariffs continue, new Section 338 tariffs on certain Canadian steel and aluminum took effect September 15, 2026, and the U.S. did not agree to extend USMCA in its current form; Ryerson may not fully pass through tariff-related costs.
Integration and debt
Integrating Olympic Steel and achieving synergies on time is a stated risk; total debt reached $1,006.1 million at September 30, 2026, all at floating rates.
Fragmented, competitive market
Ryerson competes in a highly fragmented industry and depends on its suppliers: the top 25 suppliers account for approximately 76% of purchase dollars.

What leadership says

“delivered its strongest quarter of the year, exceeding guidance across the board while eclipsing its first year synergy run rate target ahead of schedule in what continues to be a high-friction industrial economy.”

Edward Lehner, Chief Executive Officer · Ryerson Q3 2026 earnings call, October 29, 2026

“We recognize that margin growth is one of our biggest opportunities as a combined company.”

Edward Lehner, Chief Executive Officer · Ryerson Q3 2026 earnings call, October 29, 2026

“if you don't buy well, it's really hard to operate your way out of suboptimal buying.”

Edward Lehner, President and Chief Executive Officer · Ryerson Q3 2025 earnings call and Olympic Steel merger presentation, October 29, 2025

“We are speaking as one voice to the mills.”

Andrew Greiff, EVP of Ryerson and President of Olympic Steel · Ryerson Q3 2026 earnings call, October 29, 2026

Where a supplier can help

Integration tooling and data migration
With Olympic Steel's data moving into Ryerson's systems and sites being consolidated, suppliers of ERP, data integration and network-planning services can support the integration and network optimization synergy pillars.
Procurement and pricing analytics
The procurement synergy target and the widening gap between transactional and program margins make pricing, inventory and supplier analytics relevant to the margin-growth priority.
Processing equipment and automation
Approximately $75 million of 2026 capex focused on productivity and maintenance, and sites sharing equipment, open room for cutting, slitting, laser and automation suppliers.
Supply chain and logistics resilience
Tight hot roll and aluminum supply, tariffs and Middle East shipping disruption point to demand for freight, sourcing and trade-compliance support.
Serving data center and power customers
Growth from customers serving data center and power generation applications creates openings for partners in fabrication, value-added processing and project logistics tied to that end market.

Tamtam's reading of the priorities and challenges above, not the company's own words.

Selling to companies like Ryerson?

Tamtam finds the companies that match your ideal customer, researches each account and tells you who to contact and when.

Find similar companies

Key documents

Read in full by Tamtam; each summary links to the document itself.

Questions about Ryerson

What does Ryerson do?

Ryerson is a metals service center: it buys stainless steel, aluminum, carbon and alloy steels from producers and sells them in smaller, processed quantities to about 40,000 customers, from local fabricators to large OEMs, in the U.S., Canada, Mexico and China.

What is Ryerson's revenue?

FY2025 net sales were $4,571.3 million, before the Olympic Steel merger. In the first nine months of 2026, after the merger, revenue was $5.8 billion, up 66%.

How many employees does Ryerson have?

At the end of 2025, before the Olympic Steel merger, Ryerson had approximately 4,300 employees across 103 facilities in North America and three in China.

What is Ryerson's strategy?

Ryerson is integrating Olympic Steel to reach approximately $120 million in annual synergies by the beginning of 2028, growing its transactional, value-added business, and reducing leverage below 3.0x by year-end 2026.

Who leads Ryerson?

Edward Lehner has been CEO since 2015; Rick Marabito, former Olympic Steel CEO, is President and COO, and Jim Claussen is EVP and CFO.

Written by Tamtam from the company's own published documents listed above, read in full. Figures are as those documents state them, for the periods they name. (2026-11-17)