Texas Instruments account plan
Global analog embedded semiconductors
At a glance
Texas Instruments designs and makes analog and embedded processing chips for over 100,000 customers, with FY2025 revenue of $17.68 billion.
Texas Instruments (TI), headquartered in Dallas, Texas, designs and manufactures analog and embedded processing semiconductors, with more than 80,000 products sold to over 100,000 customers. Industrial and automotive each made up 33% of 2025 revenue, followed by personal electronics (21%), data center (9%) and communications equipment (3%). TI makes most of its chips in its own fabs and sells mostly direct, with more than 80% of 2025 revenue direct including TI.com. FY2025 revenue was $17.68 billion (+13.0%), operating profit $6.02 billion and net income $5.00 billion, with about 33,000 employees at December 31, 2025.
Business units
Analog
about 79% of FY2025 revenue ($14.01 billion)Power products (battery management, regulators, power stages) and Signal Chain products (amplifiers, data converters, interface, motor drives, sensing) sold into industrial, automotive, data center and other markets. Revenue rose 15% in 2025 with a 38.6% operating margin, and grew 32% to $4,911 million in Q3 2026, led by Signal Chain.
Embedded Processing
about 15% of FY2025 revenue ($2.70 billion)Microcontrollers, processors, wireless connectivity and radar products, mainly for industrial and automotive customers. Revenue rose 6% in 2025 while margin fell to 11.3% as the Lehi fab ramped; in Q3 2026 revenue rose 21% to $858 million with a 26.5% margin.
Other
about 5.5% of FY2025 revenue ($979 million)DLP products, calculators and custom ASICs. Revenue rose 3% in 2025 and fell 6% to $286 million in Q3 2026.
Strategic priorities
- Free cash flow per share growth
- TI calls long-term growth of free cash flow per share the best measure of progress; at $20 billion of revenue it frames $8 billion to $9 billion of free cash flow.
- Industrial, automotive and data center
- TI puts strategic emphasis on these three markets; data center was about 13% of revenue in Q3 2026 and grew about 95% year on year, with early 300mm ramps of application-specific power products.
- In-house 300mm manufacturing
- TI is completing a six-year elevated capex cycle building 300mm fabs in Richardson and Sherman, Texas, and Lehi, Utah; a 300mm chip costs about 40% less than a 200mm one, and TI expects internal sourcing to keep increasing.
- Capacity ahead of demand
- Clean rooms are reserved for 2027 and beyond, a large new Malaysia assembly/test site is ramping, and TI aims to outgrow the market in 2026 and 2027.
- Pricing actions
- After flat pricing in H1 2026, TI started executing price increases customer by customer from Q3, mainly in Analog, with 2027 negotiations under way.
Latest results
In Q3 2026 revenue was $6.06 billion, up 11% sequentially and 28% year on year, with industrial up more than 40%, automotive up mid-teens and data center up about 95%. Gross margin rose to 64.2% from 57.4% and operating profit to $2.87 billion (47.5% of revenue); net income was $2.43 billion and EPS $2.62 against $1.48. For the first nine months, revenue was $16.34 billion (+23%) and net income $5.95 billion. Trailing-12-month free cash flow reached $8.4 billion, including CHIPS Act incentives. Q4 2026 guidance is revenue of $5.8 billion to $6.3 billion and EPS of $2.45 to $2.79.
Investments and deals
- Silicon Labs acquisition
- Agreed on February 4, 2026 at $231.00 per share in cash (enterprise value about $7.5 billion), expected to close in the first half of 2027; TI signed a $5 billion delayed-draw term loan in June 2026 and plans to move Silicon Labs' foundry-made products into its Lehi fab.
- 300mm fab build-out
- Capex was $4.55 billion in 2025 and is guided at $2 billion to $3 billion for 2026, maybe on the higher end; TI has clean room in Richardson, Sherman 1, the Sherman 2 shell and the Lehi 2 shell.
- CHIPS Act funding
- Direct funding of up to $1.6 billion for the Sherman and Lehi fabs, of which $630 million had been received by September 30, 2026, plus a 35% investment tax credit.
- 150mm factory closures
- TI is closing its last two 150mm factories, with $85 million of restructuring in Q3 2025.
Challenges and risks
- China and trade exposure
- Customers headquartered in China were about 20% of 2025 revenue and products shipped into China about 50%; tariffs, export controls and Chinese competitors are named risks.
- Fixed-cost margin sensitivity
- TI owns its capacity, so much of the cost base is fixed and capex and depreciation have risen with the expansion; 2025 gross margin fell to 57.0% from 58.1%.
- Back-end tool and assembly constraints
- Back-end tool lead times are extending and OSAT partners are delivering less than TI wanted.
- Cyclical demand
- Industrial revenue only reached its Q3 2022 level again in Q3 2026, and the 10-K names semiconductor cycles and customer inventory adjustments as risks.
What leadership says
“Secular growth of semiconductor content is continuing alongside a strong cyclical recovery”
“Our objective is not to put out a certain growth rate, but actually to outgrow the market.”
“I think TI is in an advantage position here versus the rest of the market.”
“When there's more power, there's more opportunity for TI.”
Where a supplier can help
- Back-end equipment and assembly/test
- Tied to the back-end tool constraints and the Malaysia assembly/test ramp: tool suppliers and A/T service providers address a bottleneck management names.
- Fab ramp services
- Tied to the 300mm fab build-out in Richardson, Sherman and Lehi: equipment, materials, automation and facility services for fabs still ramping.
- Integration of Silicon Labs
- Tied to the Silicon Labs acquisition: process transfer into Lehi, systems and data integration and product-line consolidation after a first-half 2027 close.
- Data center power design ecosystem
- Tied to the data center priority: partners building rack power and thermal systems can co-design with TI's application-specific power products.
Tamtam's reading of the priorities and challenges above, not the company's own words.
Selling to companies like Texas Instruments?
Tamtam finds the companies that match your ideal customer, researches each account and tells you who to contact and when.
Find similar companiesKey documents
Read in full by Tamtam; each summary links to the document itself.
- Form 10-K for the fiscal year ended December 31, 2025
- Texas Instruments designs and manufactures analog and embedded processing semiconductors, sold to over 100,000 customers; more than 80,000 products; about 33,000 employees at December 31, 2025; design, manufacturing or sales operations in more than 30 countries.
- FY2025 revenue was $17.68 billion, up 13.0%; gross margin 57.0% (58.1% in 2024); operating profit $6.02 billion (34.1% of revenue); net income $5.00 billion; EPS $5.45.
- Segments: Analog $14.01 billion (about 79% of revenue, operating margin 38.6%), Embedded Processing $2.70 billion (about 15%, operating margin 11.3%), Other $979 million (DLP, calculators, custom ASICs).
- Markets in 2025: industrial 33% and automotive 33% of revenue, personal electronics 21%, data center 9% (a newly broken-out market), communications equipment 3%; TI puts strategic emphasis on industrial, automotive and data center.
- Strategy is to maximize long-term free cash flow per share through four competitive advantages (manufacturing and technology, broad portfolio, reach of market channels, diversity and longevity), disciplined capital allocation and efficiency. More than 80% of 2025 revenue was direct, including TI.com.
- Manufacturing: TI is near the end of a six-year elevated capex cycle (capex $4.55 billion in 2025, about $2 billion to $3 billion expected in 2026) building 300mm fabs in Richardson and Sherman, Texas, and Lehi, Utah; a 300mm chip costs about 40% less than a 200mm one; CHIPS Act direct funding of up to $1.6 billion plus a 35% ITC.
- Cash: cash flow from operations $7.15 billion, free cash flow $2.94 billion (16.6% of revenue); $6.48 billion returned to shareholders; dividends $5.00 billion.
- M&A: on February 4, 2026, TI agreed to acquire Silicon Labs for $231.00 per share in cash (enterprise value about $7.5 billion), expected to close in the first half of 2027, funded with cash and debt.
- Risks: China exposure (customers headquartered in China about 20% of revenue, products shipped into China about 50%), tariffs and export controls, competition from Asian and Chinese suppliers, cyclical demand, fixed-cost margin sensitivity, supply chain and incentive clawback.
- Form 10-Q for the quarter ended September 30, 2026
- Q3 2026 revenue was $6.06 billion, up 11% sequentially and 28% year on year, with broad growth in industrial, automotive and data center; net income $2.43 billion, EPS $2.62 (vs $1.48).
- Gross margin was 64.2% (57.4% a year earlier); operating profit $2.87 billion, 47.5% of revenue (35.1% a year earlier).
- Analog revenue rose 32% to $4,911 million (operating margin 51.0%), led by Signal Chain. Embedded Processing rose 21% to $858 million (margin 26.5% vs 15.2%). Other fell 6% to $286 million.
- First nine months: revenue $16.34 billion (+23%), net income $5.95 billion, EPS $6.44.
- Trailing-12-month cash flow from operations was $9.9 billion and free cash flow $8.4 billion (40.6% of revenue vs 14.0%), helped by $1.10 billion of CHIPS Act proceeds year to date. Capex was $1.65 billion in nine months; 2026 guidance is $2 billion to $3 billion.
- Silicon Labs acquisition (enterprise value about $7.5 billion) is expected to close in the first half of 2027. A $5 billion 364-day delayed-draw term loan was signed in June 2026; acquisition charges were $41 million year to date.
- Dividend raised 7% to $1.52 per quarter in September 2026, the 23rd consecutive annual increase. Cash and short-term investments were $8.14 billion; inventory $4.67 billion (194 days vs 222 at end-2025).
- Q3 2026 earnings conference call transcript
- Q3 2026 revenue was $6.1 billion, up 11% sequentially and 28% year on year. Analog grew 32% and Embedded Processing 21%; Other declined 6%.
- By end market: industrial up more than 40% year on year, automotive up mid-teens, data center up about 95%, personal electronics about flat, communications equipment up.
- Data center was "about 13% of revenue in Q3". TI sells about 10,000 different generic part numbers into the market and is in early 300mm ramps of application-specific power products.
- Gross margin was 64% and operating margin 47%. TTM free cash flow was $8.4 billion, including $1.6 billion of CHIPS Act incentives. Q4 guidance: revenue $5.8 billion to $6.3 billion, EPS $2.45 to $2.79.
- Pricing: flat year on year in H1 2026 and "a little bit of an uptick" in H2, mainly in Analog. 2027 price negotiations are under way.
- Capacity: 2026 capex of $2 billion to $3 billion, "maybe on the higher end". Back-end tool lead times are extending. TI's large new Malaysia assembly/test site is ramping, and it has clean rooms reserved for 2027 and beyond.
- Industrial revenue only now matched its Q3 2022 peak. Ilan cites aerospace and defense, energy infrastructure, test and measurement and robotics, with TI content of $500 to $1,000 per humanoid robot.
- Silicon Labs will move foundry-made products into TI's Lehi fab. Embedded gross margins have risen about 10 points year on year.
- Q2 2026 earnings conference call transcript
- Q2 2026 revenue was $5.5 billion, up 13% sequentially and 23% year on year, above the guided range. Analog grew 26% and Embedded Processing 16%.
- Industrial grew around 30% year on year, automotive mid-teens, and data center "doubled". Personal electronics was flat, under pressure from shortages at customers.
- Gross margin was 61% and operating margin 42%. TTM free cash flow was $6.5 billion. Q3 guidance: revenue $5.65 billion to $6.15 billion, EPS $2.23 to $2.57.
- Leadership change: CFO Rafael Lizardi retires; Julie Knecht, chief accounting officer since 2021, becomes CFO on August 1, 2026.
- Pricing was flat in H1 2026, above the usual yearly decline. TI "started executing price increases" customer by customer from Q3, mainly in Analog, with Embedded "joining the trend" for next year.
- Capacity: clean room in Richardson (RFAB2), Sherman 1 and the Sherman 2 shell, plus the Lehi 2 shell by year-end. Ilan said TI is "good for the next three years" on clean rooms. Capex is guided at $2 billion to $3 billion, possibly toward the higher end.
- Data center: 800V architectures add conversion stages and "The higher voltage, the more opportunity we see". TI's aim is to outgrow the market in 2026 and 2027.
- Silicon Labs: regulatory approvals are on plan and closing is expected in the first half of next year, funded with cash and debt.
Questions about Texas Instruments
What does Texas Instruments do?
TI designs and manufactures analog and embedded processing semiconductors, with more than 80,000 products sold to over 100,000 customers, mainly in industrial, automotive, personal electronics and data center markets.
What is Texas Instruments' revenue?
FY2025 revenue was $17.68 billion, up 13.0%, with net income of $5.00 billion. Q3 2026 revenue was $6.06 billion, up 28% year on year.
How many employees does Texas Instruments have?
About 33,000 employees at December 31, 2025, with design, manufacturing or sales operations in more than 30 countries.
Who leads Texas Instruments?
Haviv Ilan is Chairman, President and CEO. Julie Knecht became CFO on August 1, 2026, succeeding Rafael Lizardi.
What is Texas Instruments' strategy?
TI aims to maximise long-term free cash flow per share through owned 300mm manufacturing, a broad analog and embedded portfolio, direct market reach and a focus on industrial, automotive and data center markets.
Written by Tamtam from the company's own published documents listed above, read in full. Figures are as those documents state them, for the periods they name. (2026-11-17)