Tamtam Try Tamtam free
X-FAB logo

X-FAB account plan

Analog mixed-signal semiconductor foundry

At a glance

X-FAB is a Euronext Paris-listed specialty foundry for analog/mixed-signal, MEMS and SiC chips: USD 870.3 million 2025 revenue, 4,496 employees.

X-FAB Silicon Foundries SE, based in Tessenderlo-Ham, Belgium and listed on Euronext Paris, is a pure-play specialty foundry that manufactures customers' analog/mixed-signal, microsystems, photonics and wide bandgap (SiC, GaN) chips. It runs six fabs in Erfurt, Dresden and Itzehoe (Germany), Corbeil-Essonnes (France), Kuching (Malaysia) and Lubbock (Texas), serving more than 400 customers, mostly fabless companies in automotive, industrial and medical. FY 2025 revenue was USD 870.3 million (+6.6%) with a 22.6% EBITDA margin and net profit of USD 30.1 million. It had 4,496 employees at end-2025. Elex NV and Sensinnovat BV each hold about a quarter of the shares, and Damien Macq has been CEO since February 6, 2026.

Business units

Strategic priorities

Specialisation
CEO Damien Macq's first priority is continued specialisation of technologies in CMOS & SOI plus customised co-creation in microsystems, photonics and wide bandgap.
Business and customer diversification
X-FAB wants to reduce dependencies, notably on Melexis (43% of 2025 revenue), by reusing technologies in IoT, robotics, data-center power and renewables.
Data centers
Data-center revenue is in the range of USD 20 million to 30 million today, with a long-term revenue potential of approximately USD 300 million a year across SiC, GaN, photonics and CMOS.
Erfurt microsystems hub (Fab4Micro)
Erfurt is being converted into the group's microsystems and photonics hub with EUR 127.4 million of EU Chips Act funding and USD 143 million of approved capex, with initial production by the end of 2028.
Raising utilisation and cutting costs
Utilisation was at the 60% level at the end of Q2 2026 against a target of 85-90%; a cost-saving programme with a high single-digit headcount reduction targets USD 6 million per quarter of savings by Q4 2026.

Latest results

In H1 2026 total revenue fell 5.7% to USD 395.4 million, as automotive dropped 15% to USD 237.6 million on customers' inventory adjustments while industrial rose 12% and medical 39%. Gross profit fell to USD 61.2 million from USD 94.6 million, and the half ended with a net loss of USD 13.9 million, including derecognition of Malaysian deferred tax assets. Q2 2026 revenue was USD 199.8 million (-7% year-on-year, +2% sequentially) with a 16.8% EBITDA margin, and automotive book-to-bill reached its highest level in two years. Q3 2026 guidance is revenue of USD 195-205 million and an EBITDA margin of 17-20%; the CEO says H1 2026 marked the bottom for automotive.

Investments and deals

Completed capacity expansion
The three-year expansion is complete: Kuching (Malaysia) went from 30,000 to 40,000 wafer starts a month, with capacity also added at Corbeil-Essonnes, Dresden and Lubbock; 2025 capex payments were USD 204.1 million.
Fab4Micro in Erfurt
USD 143 million of capex approved in July 2026 for a new Erfurt cleanroom, backed by EUR 127.4 million of EU Chips Act funding.
Piezo-MEMS and photonics lines
A lead-free aluminium nitride piezo-MEMS line is being set up with a major OEM, and silicon photonics is developed with partners such as Ligentec.
Automation and digitisation
Software-controlled material movement and automated set-up and transport are being rolled out at all sites and continue in 2026.
Lower capex in 2026
2026 capex is projected at around USD 100 million, for process capabilities, the Erfurt and Lubbock conversions and maintenance.

Challenges and risks

Automotive destocking
Automotive, the largest end market, grew only 1% in 2025 and fell 15% in H1 2026 on inventory adjustments and the end of major long-term agreements.
Customer concentration
Melexis accounted for 43% of 2025 revenue and the top five customers 58%, and most contracts carry no minimum order requirement.
Low utilisation of a fixed cost base
Profitability depends on utilisation, which was at the 60% level at the end of Q2 2026 after the capacity expansion.
Debt and liquidity
Net debt was USD 312.3 million at June 30, 2026, and the EUR 200 million revolving facility needs replacing; a new facility or a Schuldschein is under review.
Wafer, energy and currency costs
Raw wafers were 11% of cost of sales in 2025; power supply, currency exposure against euro and ringgit costs and cyber risk are named risks.

What leadership says

“Stronger automotive bookings reinforce our view that the first half of 2026 marked the bottom, with X-FAB's automotive business set for a gradual recovery in the second half.”

Damien Macq, CEO · Q2 2026 results press release, July 30, 2026

“long-term revenue potential of approximately USD 300 million annually for data center applications”

Damien Macq, CEO · Q2 2026 results conference call, July 30, 2026

“positions Erfurt as a key growth engine for MEMS, microfluidics and photonics”

Damien Macq, CEO · Q2 2026 results conference call, July 30, 2026, on the EU Chips Act award

“Preserving liquidity, improving operational efficiency and supporting the group's long-term growth opportunities”

Alba Morganti, CFO · Q2 2026 results conference call, July 30, 2026

Where a supplier can help

Cleanroom construction and fab equipment
Tied to Fab4Micro in Erfurt and the piezo-MEMS line: cleanroom build, MEMS and photonics process tools and installation.
Fab automation and yield software
Tied to the automation and digitisation investment and the utilisation challenge: automated material handling, manufacturing execution and yield analytics.
Cost reduction and energy efficiency
Tied to the cost-saving programme and the energy cost risk: energy management, procurement and process efficiency for six fabs.
Demand generation for new customers
Tied to the diversification priority and data-center ambition: market intelligence and sales support to win customers beyond Melexis and automotive.
Refinancing advisory
Tied to the debt and liquidity challenge: banks and advisers for the replacement of the EUR 200 million revolving facility.

Tamtam's reading of the priorities and challenges above, not the company's own words.

Selling to companies like X-FAB?

Tamtam finds the companies that match your ideal customer, researches each account and tells you who to contact and when.

Find similar companies

Key documents

Read in full by Tamtam; each summary links to the document itself.

Questions about X-FAB

What does X-FAB do?

X-FAB is a pure-play specialty foundry that manufactures customers' analog/mixed-signal, MEMS, photonics and SiC/GaN chips in six fabs, mainly for automotive, industrial and medical markets.

What is X-FAB's revenue?

FY 2025 revenue was USD 870.3 million, up 6.6%; H1 2026 revenue was USD 395.4 million, down 5.7%.

How many employees does X-FAB have?

X-FAB had 4,496 employees at December 31, 2025, excluding contract workers.

Who is the CEO of X-FAB?

Damien Macq became CEO on February 6, 2026, succeeding Rudi De Winter; Alba Morganti is CFO.

What is X-FAB's strategy?

Specialisation, business and customer diversification and disciplined execution, with growth bets in data centers, microsystems and photonics in Erfurt, and SiC and GaN.

Written by Tamtam from the company's own published documents listed above, read in full. Figures are as those documents state them, for the periods they name. (2026-11-17)